Image 1 of 2
Image 2 of 2
BLV10786 Front PTO shaft Kit for 1 series including 1023e, 1025r, 1026r.
Free Ground Shipping to lower 48 states
New front PTO Kit Complete. BLV10786
Please note, this listing is for the entire PTO kit, bearings, hardware, shaft and the RIO harness and proximity sensor and PTO shield, as shown, to install the front PTO shaft on the 1 series tractor.
Please note, the large front bracket which carries the PTO bearings is not part of the PTO kit, but rather is part of the Front Hitch Mounting Kit. That bracket is either part number LVA21000 or LVA22590, depending upon the under tractor mounting kit brackets selected.
With the 1 series, you can use either the BLV10680 mounting kit or the BLV10796. Please note these large under tractor brackets which hold the PTO bearings are not interchangeable and must be used with the correct quick hitch mounting kit. If the wrong main bracket is used with the incorrect frame mounts, the PTO shaft angle won’t clear the steering cylinder and the front axle housing.
Very important for the 1 series, you MUST use the LVA21000 Main Hitch Bracket if you are using the longer frame brackets under the tractor, which are LVU34571 hitch and mower brackets as well as two of the LVU29536 triangular extension brackets. These parts are also used on the 2025r Generation 2 tractor (2018-2026).
However, the BLV10796 quick hitch mounting bracket kit includes frame brackets and the main hitch bracket that holds the PTO bearings under the tractor. When you use the BLV10796, you must use the LVA22590 main mounting bracket and also the LVU25908 front hitch mounting lift arm plates. These brackets can not be used on the Generation 2, 2025r tractor (those made from 2018-2026).
However, the LVU25908 and the LVA22590 brackets are the ONLY brackets that fit the Generation 1, 2025r which are the tractors made in 2013-2017. This is why we suggest you contact us when buying used front blades, front snowblowers or front rotary brooms and provide photos of the parts you are considering buying, so we can help you determine what you will need to mount the new front implement on your tractor.
Please note, none of these brackets have any part numbers or identifying marks on them. The brackets have to be identified by someone who knows the differences in the brackets and why these differences are important.
We try to keep our listings current but the inventory of these changes daily. If you need the shaft only or the entire PTO kit, contact us as we likely have it in stock.
If you need this shaft because your bought a pre-owned hitch, front blade or snowblower and your purchase came with a PTO shaft that doesn’t fit your tractor, contract us as we may take your PTO shaft in on trade towards this shaft.
We need to see several photos of the shaft you would like to trade and we will contact you and let you know if we will accept the shaft in trade towards this shaft and how much credit we will give you for your PTO shaft.
Shafts must be in very good condition. You pay the shipping to send your trade in PTO shaft and we pay the shipping to send you this PTO shaft.
Or you can simply purchase this shaft new outright and we will ship it to you.
This shaft and PTO component kit is BRAND NEW and has never been installed. One of our customers bought a 1025r with the front PTO kit and the Quick Hitch for the 54” Snowplow. He never did buy a snowblower, so this shaft has remained in the box until we took it on trade towards the shaft for his new tractor. Your chance to get a brand new PTO shaft and kit and save money. Also, if you have a shaft you can’t use, let us know and perhaps we can help each other.
Please note, the photos are “stock photos” of other 1 series shafts we have had in stock. Since we use stock photos on some of these items, please make sure to read the product listing details so you are clear what it is you are buying. Any questions, please contact us we are glad to help.
Thanks for shopping on our site and please contact us with any questions you may have.
Free Ground Shipping to lower 48 states
New front PTO Kit Complete. BLV10786
Please note, this listing is for the entire PTO kit, bearings, hardware, shaft and the RIO harness and proximity sensor and PTO shield, as shown, to install the front PTO shaft on the 1 series tractor.
Please note, the large front bracket which carries the PTO bearings is not part of the PTO kit, but rather is part of the Front Hitch Mounting Kit. That bracket is either part number LVA21000 or LVA22590, depending upon the under tractor mounting kit brackets selected.
With the 1 series, you can use either the BLV10680 mounting kit or the BLV10796. Please note these large under tractor brackets which hold the PTO bearings are not interchangeable and must be used with the correct quick hitch mounting kit. If the wrong main bracket is used with the incorrect frame mounts, the PTO shaft angle won’t clear the steering cylinder and the front axle housing.
Very important for the 1 series, you MUST use the LVA21000 Main Hitch Bracket if you are using the longer frame brackets under the tractor, which are LVU34571 hitch and mower brackets as well as two of the LVU29536 triangular extension brackets. These parts are also used on the 2025r Generation 2 tractor (2018-2026).
However, the BLV10796 quick hitch mounting bracket kit includes frame brackets and the main hitch bracket that holds the PTO bearings under the tractor. When you use the BLV10796, you must use the LVA22590 main mounting bracket and also the LVU25908 front hitch mounting lift arm plates. These brackets can not be used on the Generation 2, 2025r tractor (those made from 2018-2026).
However, the LVU25908 and the LVA22590 brackets are the ONLY brackets that fit the Generation 1, 2025r which are the tractors made in 2013-2017. This is why we suggest you contact us when buying used front blades, front snowblowers or front rotary brooms and provide photos of the parts you are considering buying, so we can help you determine what you will need to mount the new front implement on your tractor.
Please note, none of these brackets have any part numbers or identifying marks on them. The brackets have to be identified by someone who knows the differences in the brackets and why these differences are important.
We try to keep our listings current but the inventory of these changes daily. If you need the shaft only or the entire PTO kit, contact us as we likely have it in stock.
If you need this shaft because your bought a pre-owned hitch, front blade or snowblower and your purchase came with a PTO shaft that doesn’t fit your tractor, contract us as we may take your PTO shaft in on trade towards this shaft.
We need to see several photos of the shaft you would like to trade and we will contact you and let you know if we will accept the shaft in trade towards this shaft and how much credit we will give you for your PTO shaft.
Shafts must be in very good condition. You pay the shipping to send your trade in PTO shaft and we pay the shipping to send you this PTO shaft.
Or you can simply purchase this shaft new outright and we will ship it to you.
This shaft and PTO component kit is BRAND NEW and has never been installed. One of our customers bought a 1025r with the front PTO kit and the Quick Hitch for the 54” Snowplow. He never did buy a snowblower, so this shaft has remained in the box until we took it on trade towards the shaft for his new tractor. Your chance to get a brand new PTO shaft and kit and save money. Also, if you have a shaft you can’t use, let us know and perhaps we can help each other.
Please note, the photos are “stock photos” of other 1 series shafts we have had in stock. Since we use stock photos on some of these items, please make sure to read the product listing details so you are clear what it is you are buying. Any questions, please contact us we are glad to help.
Thanks for shopping on our site and please contact us with any questions you may have.