When you want to protect the pavement when clearing snow, a rubber plow edge is a great way to clear the snow and water from the pavement and not scratch or harm the surface. Replace the steel plow edge on your Super ATV Pro Plow with a custom made, heavy duty plow edge which is made to fit your plow.
The rubber plow edge is 72” wide, 4 inches tall and 3/4” thick. The rubber is professionally plug cut to provide a rubber wear edge that can be flipped over and the other side of the edge used when you have worn down the first side.
Ready to install, all mounting holes are plug cut for easy and precise installation. We offer two choices for your plow.
Rubber edge is 4” tall, 3/4” thick and 72” long.
Holes are cut into the rubber along the top edge of the rubber to create a large single wear side on the rubber edge.
Includes mounting hardware
You MUST use your plows steel edge to secure the rubber edge as shown.
Provides 2.5” of rubber edge beneath the plow when installed, for long wear life. This edge is professionally cut for the edge to mount on the plow with the holes for the rubber along the top edge. This is for those owners who want to have the greatest amount of rubber wear edge on the plow when installed.
Rubber edge is 4” tall, 3/4” thick and 72” long.
Holes are cut into the center of the rubber to provide two wear edges on the material.
Includes mounting hardware to use your plows steel plow edge as the mounting strap for your plows new rubber edge.
This rubber edge is mounted so you can flip the rubber edge over when worn and have a rubber plow edge with two wear sides.
The pictures of the plow on the Can Am show the rubber mounted to have Double Sided rubber edge.
This is a rubber edge which is intended to provide 1.25 to 1.5” of rubber beneath the plow base for clearing the pavement.
This will include the Single or Double Sided Rubber Edge and a custom made UHMW strap to mount the rubber edge to your plow.
This Mounting Kit is for those plow owners who want to remove the steel wear edge from their plow and install the new rubber edge with our custom made UHMW mounting strap and use stainless steel hardware, to avoid any corrosion on the hardware..
Decide whether you would like the Single Side Rubber Edge to have one larger wear edge or
A Double sided rubber edge, with an equal wear side on each side of the rubber. The images showing the plow on the Can Am show a Double Sided Rubber edge on that plow.
The Select whether you want to use the steel plow edge on your plow to install the rubber edge or if you would like to remove the steel edge (if its worn or damaged) and replace it with our custom cut UHMW edge to install on the plow.
If you are going to use the Steel Plow Edge to install your new rubber edge, then order either the
Single Sided or Double Sided Wear Edge Only.
If you would like to replace the steel plow edge and install the new rubber edge using our UHMW Mounting strap, then order either the
Single Sided Complete Edge Kit
or
The Double Sided Complete Edge Kit
When you order the Single Side or Double Side Rubber edge only, you will get that rubber edge and the mounting hardware to install the new rubber edge.
When you order the Single Sided Complete Edge Kit or the Double Sided Complete Edge Kit, the shipment will include
The single or double sided rubber plow edge
The custom cut UHMW Mounting Strap
The Stainless Steel Hardware set for corrosion free installation.
Installation and use instructions are included.
Typical installation times are 15 to 25 minutes to switch from the steel plow edge to the rubber plow edge kit.
Please contact us with any questions.
Thank you for your interest in our products.
When you want to protect the pavement when clearing snow, a rubber plow edge is a great way to clear the snow and water from the pavement and not scratch or harm the surface. Replace the steel plow edge on your Super ATV Pro Plow with a custom made, heavy duty plow edge which is made to fit your plow.
The rubber plow edge is 72” wide, 4 inches tall and 3/4” thick. The rubber is professionally plug cut to provide a rubber wear edge that can be flipped over and the other side of the edge used when you have worn down the first side.
Ready to install, all mounting holes are plug cut for easy and precise installation. We offer two choices for your plow.
Rubber edge is 4” tall, 3/4” thick and 72” long.
Holes are cut into the rubber along the top edge of the rubber to create a large single wear side on the rubber edge.
Includes mounting hardware
You MUST use your plows steel edge to secure the rubber edge as shown.
Provides 2.5” of rubber edge beneath the plow when installed, for long wear life. This edge is professionally cut for the edge to mount on the plow with the holes for the rubber along the top edge. This is for those owners who want to have the greatest amount of rubber wear edge on the plow when installed.
Rubber edge is 4” tall, 3/4” thick and 72” long.
Holes are cut into the center of the rubber to provide two wear edges on the material.
Includes mounting hardware to use your plows steel plow edge as the mounting strap for your plows new rubber edge.
This rubber edge is mounted so you can flip the rubber edge over when worn and have a rubber plow edge with two wear sides.
The pictures of the plow on the Can Am show the rubber mounted to have Double Sided rubber edge.
This is a rubber edge which is intended to provide 1.25 to 1.5” of rubber beneath the plow base for clearing the pavement.
This will include the Single or Double Sided Rubber Edge and a custom made UHMW strap to mount the rubber edge to your plow.
This Mounting Kit is for those plow owners who want to remove the steel wear edge from their plow and install the new rubber edge with our custom made UHMW mounting strap and use stainless steel hardware, to avoid any corrosion on the hardware..
Decide whether you would like the Single Side Rubber Edge to have one larger wear edge or
A Double sided rubber edge, with an equal wear side on each side of the rubber. The images showing the plow on the Can Am show a Double Sided Rubber edge on that plow.
The Select whether you want to use the steel plow edge on your plow to install the rubber edge or if you would like to remove the steel edge (if its worn or damaged) and replace it with our custom cut UHMW edge to install on the plow.
If you are going to use the Steel Plow Edge to install your new rubber edge, then order either the
Single Sided or Double Sided Wear Edge Only.
If you would like to replace the steel plow edge and install the new rubber edge using our UHMW Mounting strap, then order either the
Single Sided Complete Edge Kit
or
The Double Sided Complete Edge Kit
When you order the Single Side or Double Side Rubber edge only, you will get that rubber edge and the mounting hardware to install the new rubber edge.
When you order the Single Sided Complete Edge Kit or the Double Sided Complete Edge Kit, the shipment will include
The single or double sided rubber plow edge
The custom cut UHMW Mounting Strap
The Stainless Steel Hardware set for corrosion free installation.
Installation and use instructions are included.
Typical installation times are 15 to 25 minutes to switch from the steel plow edge to the rubber plow edge kit.
Please contact us with any questions.
Thank you for your interest in our products.
