Image 1 of 2
Image 2 of 2
Snowblower UHMW Cooper Bars, Drift Cutter bars, One Pair with Hardware
Free Shipping via Ground Delivery to the lower 48 states
UHMW Cooper Bars or Super Cooper Bars, our Drift Cutter Bars for front mounted and 3ph snowblowers.
Our drift cutter bars are made from UHMW so they never rust, won’t bed and will never need painting or other finish. The UHMW is tough and will bend with the impacts and flex back to their natural position in all but extreme impact cases.
Don’t Forget, you can use our Drift Cutter / Cooper Bars for corner markers for plows, snow pushers or snow blowers. Need something Custom made? Just ask us….
Choose between Cooper Bar drift cutter bars or our Super Cooper Drift Cutter Bars. Here are the sizes of these bars.
The Cooper Drift Cutter Bars for many blowers are
The 15” and 18” long Cooper bar drift cutters are 1.5” wide and 1/2” thick. You select the length you want your Cooper bars to be on your blower.
Includes Stainless Hardware for rust free hardware installation.
The Super Cooper Drift Cutters are
24” tall and 2” front to back and 1/2” thick
If you want Cooper Bars of a special size, contact us and we can Custom Cut your Cooper bars to fit your blower drift cutter needs.
Remember, the Mounting holes on the blower end panels vary so much, we drill the most common mounting holes in our Cooper Bar / Drift Cutter Bars. If your blower needs a special mounting hole which doesn’t align with both of our drift cutter holes, use one of our mounting holes and then drill the second to hole to match your blower for the perfect fit.
Why are the drift cutters on the snow blowers?
To help slice deep snow ahead of the blower
To help process the snow so it will drop down in front of the blower for snow clearing.
For easy visibility where the blower corners are during use.
Select the Drift Cutter Bars for your blower size. Most front mounted blowers will want to use the 15” or 18” tall drift cutters. The rear snowblowers, such as the Frontier Rear blowers often would benefit from longer drift cutters, to help you see the blowers corners, such as the 24” long drift cutters. You can mount any of the Drift Cutters on any blower.
Important Note About Mounting holes on the Drift Bars.
Our drift bars ship with the two most common mounting holes drilled in the bars. If our mounting holes don’t match the holes on your blower, you can either drill our drift cutters to match your blower mounting holes or you can drill your blowers 2nd hole to mount our wear bars. it’s entirely up to you.
Drilling the drift cutters is very easy.
We include 4 sets of bolts, washers and lock nuts, 2 sets for each Drift Cutter. Our hardware is stainless and won’t rust or corrode. Easy to install………Very strong, tough to damage and also less likely to cause damage to what they encounter. Making these out of UHMW makes them strong, long lasting and you never have to worry about painting or powder coating these drift cutter bars.
Why we call these
“Cooper Bars and Super Cooper Bars”
We also call our Drift Cutters “Cooper Bars” in honor of one of our customers K9 family members who suggested me make these drift cutters out of UHMW material. Please see our K9 Friends of SulleyBear page for Cooper’s photo. Thank’s Cooper for the idea. We call our standard sisze drift cutter Cooper Bars and the 24” long Drift Cutters are our “Super Coopers”.
Thank you for your interest in our Drift Cutters.
Free Shipping via Ground Delivery to the lower 48 states
UHMW Cooper Bars or Super Cooper Bars, our Drift Cutter Bars for front mounted and 3ph snowblowers.
Our drift cutter bars are made from UHMW so they never rust, won’t bed and will never need painting or other finish. The UHMW is tough and will bend with the impacts and flex back to their natural position in all but extreme impact cases.
Don’t Forget, you can use our Drift Cutter / Cooper Bars for corner markers for plows, snow pushers or snow blowers. Need something Custom made? Just ask us….
Choose between Cooper Bar drift cutter bars or our Super Cooper Drift Cutter Bars. Here are the sizes of these bars.
The Cooper Drift Cutter Bars for many blowers are
The 15” and 18” long Cooper bar drift cutters are 1.5” wide and 1/2” thick. You select the length you want your Cooper bars to be on your blower.
Includes Stainless Hardware for rust free hardware installation.
The Super Cooper Drift Cutters are
24” tall and 2” front to back and 1/2” thick
If you want Cooper Bars of a special size, contact us and we can Custom Cut your Cooper bars to fit your blower drift cutter needs.
Remember, the Mounting holes on the blower end panels vary so much, we drill the most common mounting holes in our Cooper Bar / Drift Cutter Bars. If your blower needs a special mounting hole which doesn’t align with both of our drift cutter holes, use one of our mounting holes and then drill the second to hole to match your blower for the perfect fit.
Why are the drift cutters on the snow blowers?
To help slice deep snow ahead of the blower
To help process the snow so it will drop down in front of the blower for snow clearing.
For easy visibility where the blower corners are during use.
Select the Drift Cutter Bars for your blower size. Most front mounted blowers will want to use the 15” or 18” tall drift cutters. The rear snowblowers, such as the Frontier Rear blowers often would benefit from longer drift cutters, to help you see the blowers corners, such as the 24” long drift cutters. You can mount any of the Drift Cutters on any blower.
Important Note About Mounting holes on the Drift Bars.
Our drift bars ship with the two most common mounting holes drilled in the bars. If our mounting holes don’t match the holes on your blower, you can either drill our drift cutters to match your blower mounting holes or you can drill your blowers 2nd hole to mount our wear bars. it’s entirely up to you.
Drilling the drift cutters is very easy.
We include 4 sets of bolts, washers and lock nuts, 2 sets for each Drift Cutter. Our hardware is stainless and won’t rust or corrode. Easy to install………Very strong, tough to damage and also less likely to cause damage to what they encounter. Making these out of UHMW makes them strong, long lasting and you never have to worry about painting or powder coating these drift cutter bars.
Why we call these
“Cooper Bars and Super Cooper Bars”
We also call our Drift Cutters “Cooper Bars” in honor of one of our customers K9 family members who suggested me make these drift cutters out of UHMW material. Please see our K9 Friends of SulleyBear page for Cooper’s photo. Thank’s Cooper for the idea. We call our standard sisze drift cutter Cooper Bars and the 24” long Drift Cutters are our “Super Coopers”.
Thank you for your interest in our Drift Cutters.