Replace the steel snow pusher wear edge on your Land Pride Pusher with our custom made rubber wear edge, made to fit your pusher and be a direct replacement. Stop damaging the pavement surface and instead, replace the steel wear edge with our Heavy Duty 6” Tall by 1” thick rubber pusher edge.
Our rubber pusher edge is double sided and when the first edge is worn down, unbolt the strap, flip the rubber over and start over with a new pusher edge. This provides you double the wear life for your snow pusher.
All of our rubber wear edges are professionally machined to bolt onto your snow pusher. We also include new hardware, to make the installation of your new edge easy and trouble free.
We sell our Rubber Pusher Edge KITS or our Rubber Pusher Edges. Here is the difference and what you should order for your Landpride Pusher.
This is the product you should order if you want to replace your steel snow pusher edge with a Professionally Cut, Low Surface Friction Rubber Pusher Edge.
Our Rubber Pusher Edge Kits include
One 6” tall by 1” Thick Rubber Edge Professionally cut to fit your snow pusher.
The Steel Mounting Strap to Hold the rubber pusher edge on your pusher, it is machine cut to hold carriage bolts and powder coated.
Corrosion Resistant Carriage Bolts, Flat washers, Lock washers and nuts.
Installation instructions
Rubber Edge is for those who want to purchase just the rubber edge, to replace either another rubber edge or the UHMW edge. The rubber is machine cut for your pusher for easy trouble free installation.
Please note, when you order the Rubber Edge, you must have your own mounting strap to properly install and secure the rubber edge. You can NOT use the steel plow edge to secure your new rubber edge, it won’t work. If you need the mounting strap, please order the Rubber Edge KIT.
Who Orders the Rubber Edge ?- This is typically for those who are already using a rubber edge and need to replace it. When you buy our rubber edge, you get the following;
One 6” tall by 1” Thick Rubber Edge Professionally cut to fit your snow pusher.
Corrosion Resistant Carriage Bolts, Flat washers, Lock washers and nuts.
Installation instructions
Hardware included, based upon the width of your snow pusher;
60” Pusher ships with 10 carriage bolts, 10 flat washers, 10 lock washers, 10 Nuts.
72” Pusher ships with 12 carriage bolts, 12 flat washers, 12 lock washers, 12 nuts
84” Pusher ships with 14 carriage bolts, 14 flat washers, 14 lock washers, 14 nuts
Stainless Hardware for a lifetime of corrosion free use.
60 inch pusher, upgrade to stainless hardware adds $30
72 inch pusher, upgrade to stainless hardware adds $35
84 inch pusher, upgrade to stainless hard ware adds $40
Please contact us with any questions. Thank You for your interest in our products.
Replace the steel snow pusher wear edge on your Land Pride Pusher with our custom made rubber wear edge, made to fit your pusher and be a direct replacement. Stop damaging the pavement surface and instead, replace the steel wear edge with our Heavy Duty 6” Tall by 1” thick rubber pusher edge.
Our rubber pusher edge is double sided and when the first edge is worn down, unbolt the strap, flip the rubber over and start over with a new pusher edge. This provides you double the wear life for your snow pusher.
All of our rubber wear edges are professionally machined to bolt onto your snow pusher. We also include new hardware, to make the installation of your new edge easy and trouble free.
We sell our Rubber Pusher Edge KITS or our Rubber Pusher Edges. Here is the difference and what you should order for your Landpride Pusher.
This is the product you should order if you want to replace your steel snow pusher edge with a Professionally Cut, Low Surface Friction Rubber Pusher Edge.
Our Rubber Pusher Edge Kits include
One 6” tall by 1” Thick Rubber Edge Professionally cut to fit your snow pusher.
The Steel Mounting Strap to Hold the rubber pusher edge on your pusher, it is machine cut to hold carriage bolts and powder coated.
Corrosion Resistant Carriage Bolts, Flat washers, Lock washers and nuts.
Installation instructions
Rubber Edge is for those who want to purchase just the rubber edge, to replace either another rubber edge or the UHMW edge. The rubber is machine cut for your pusher for easy trouble free installation.
Please note, when you order the Rubber Edge, you must have your own mounting strap to properly install and secure the rubber edge. You can NOT use the steel plow edge to secure your new rubber edge, it won’t work. If you need the mounting strap, please order the Rubber Edge KIT.
Who Orders the Rubber Edge ?- This is typically for those who are already using a rubber edge and need to replace it. When you buy our rubber edge, you get the following;
One 6” tall by 1” Thick Rubber Edge Professionally cut to fit your snow pusher.
Corrosion Resistant Carriage Bolts, Flat washers, Lock washers and nuts.
Installation instructions
Hardware included, based upon the width of your snow pusher;
60” Pusher ships with 10 carriage bolts, 10 flat washers, 10 lock washers, 10 Nuts.
72” Pusher ships with 12 carriage bolts, 12 flat washers, 12 lock washers, 12 nuts
84” Pusher ships with 14 carriage bolts, 14 flat washers, 14 lock washers, 14 nuts
Stainless Hardware for a lifetime of corrosion free use.
60 inch pusher, upgrade to stainless hardware adds $30
72 inch pusher, upgrade to stainless hardware adds $35
84 inch pusher, upgrade to stainless hard ware adds $40
Please contact us with any questions. Thank You for your interest in our products.
