Image 1 of 6
Image 2 of 6
Image 3 of 6
Image 4 of 6
Image 5 of 6
Image 6 of 6
Frontier SB2176 UHMW Wear bar, to replace 5RD669136
Free Ground Shipping to Lower 48 States
The Frontier SB2176 is a Front End Loader Mounted hydraulically driven front mounted snowblower. This snow blower is sold new with a steel bolt on wear bar with this part number.
Bolt on Steel Wear bar 5RD669136*
*Please make sure your blower uses these part numbers by checking the Deere parts book
A Special Note about the blower shoes for your blower.
If your blower has blower shoes which mount on the center of outside ends of the snowblower panel, we have a UHMW shoe which will work for your snowblower to allow you to replace the blower shoes with a UHMW blower shoe. If your blowers shoes match Deere part number 5RD666254 or 5RD666255 we have a solution for your blower. It also appears that the blowers serial number is 100057 or LOWER, we have a solution for you.
It’s best to take pictures of your blowers shoes if you have any questions and email them to us and we can verify whether our shoes will work for your blower. We are working on a UHMW blower solution for the blowers which have the rear corner mounted shoes and will update the site when we have a solution for this newer shoe design. Thanks for your understanding as we deal with changing blower models, etc.
Snow blower Wear Bar across the bottom back of the blower.
The snowblower rides on this steel wear bar on your pavement when clearing snow. The steel wear bar is very abrasive on the pavement and cause extensive damage to the pavement over time. Those blower owners who want to protect their pavement replace the steel wear edge with a UHMW wear edge.
Our Ultra High Molecular Weight Polyethylene wear bar, or also known as UHMW, is an extremely durable material and the lowest surface friction material produced. UHMW is very strong and slides much smoother and with far less friction on your pavement.
Why do snowblower owners upgrade to the UHMW wear bar?
They do not cause surface abrasion damage to the pavement, which is very destructive and will lead to having to replace the pavement.
UHMW is very quiet and eliminates the screeching and scraping sounds from the pavement grinding of steel surfaces.
The blower slides smoothly, easily and quietly. It makes the blower easier to push on the pavement.
They want to protect both the pavement and the snowblower from any surface friction damage.
What do you get when you order our SB2176 Snowblower UHMW wear bar kit?
A custom machined UHMW wear bar to replace the steel wear bar on your SB2176 blower.
A full set of corrosion resistant hardware to help you mount the new UHMW wear bar on your blower.
What options are there for replacing the steel blower shoes to reduce this pavement damage from the shoes making contact?
We are working on options for the existing blower shoes. The blower shoes used on this blower are a unique design and require a unique solution. Please contact us if you are looking for a low friction option for your blowers shoes. We can discuss some of the options for dealing with the blower shoe friction.
Who is a customer for this Frontier SB2176 UHMW Wear Bar and shoe kit ?
Anyone who needs to or desires to replace the steel wear bar on this snowblower.
An owner of the snowblower who wants to reduce the surface friction of their snow blower on the pavement.
Someone looking to prevent the damage to their pavement
A new owner of this blower who doesn’t want to allow the steel wear bar to cause the friction damage to their pavement.
What is the installation process to remove the steel wear bar and install the new UHMW wear bar?
The wear bar unbolts from your blower and is replaced with our new machined wear bar with the hardware included. This is a straight forward process and is simple. This should take 30 minutes or less with normal hand tools.
Always Make sure to safely support the blower when working on it. Please follow all safety procedures when working on this equipment.
Important notes and details about this product
This product is produced when ordered. Please allow 15 to 18 business days for this to ship to you.
This Product is produced when ordered due to these blowers being hydraulically driven and the additional equipment needed to operate these blowers.
When your order is placed, we will contact you to inquire about the surfaces cleared with your blower and the tractor used to operate the blower. We will make some modifications to the product to get our customers the very best product for their needs.
Also, depending upon the total volume of pavement cleared with this blower, It also may affect the total width of the UHMW blower wear edge.
The UHMW wear edge is the same width and length as the steel wear bar it replaces. But our UHMW edge is thicker and is all professionally machined to bolt right onto your snowblower. The thickness of the wear edge are based upon our customers answers to our questions.
We will ship your new UHMW wear bar as a one piece wear edge as that is the best wear edge for the blower. The package is considered “Oversize” due to the length of the wear bar and this extra cost is reflected in our products price.
If you are looking to protect the pavement you are clearing from the surface abrasion of steel on either concrete or asphalt, our UHMW edge is a great solution. It is made to be a direct replacement edge and fits perfectly on your snowblower.
Our UHMW blower shoes for this model blower remain under development, due to their unique mounting method.
Please contact us with any questions you may have.
Free Ground Shipping to Lower 48 States
The Frontier SB2176 is a Front End Loader Mounted hydraulically driven front mounted snowblower. This snow blower is sold new with a steel bolt on wear bar with this part number.
Bolt on Steel Wear bar 5RD669136*
*Please make sure your blower uses these part numbers by checking the Deere parts book
A Special Note about the blower shoes for your blower.
If your blower has blower shoes which mount on the center of outside ends of the snowblower panel, we have a UHMW shoe which will work for your snowblower to allow you to replace the blower shoes with a UHMW blower shoe. If your blowers shoes match Deere part number 5RD666254 or 5RD666255 we have a solution for your blower. It also appears that the blowers serial number is 100057 or LOWER, we have a solution for you.
It’s best to take pictures of your blowers shoes if you have any questions and email them to us and we can verify whether our shoes will work for your blower. We are working on a UHMW blower solution for the blowers which have the rear corner mounted shoes and will update the site when we have a solution for this newer shoe design. Thanks for your understanding as we deal with changing blower models, etc.
Snow blower Wear Bar across the bottom back of the blower.
The snowblower rides on this steel wear bar on your pavement when clearing snow. The steel wear bar is very abrasive on the pavement and cause extensive damage to the pavement over time. Those blower owners who want to protect their pavement replace the steel wear edge with a UHMW wear edge.
Our Ultra High Molecular Weight Polyethylene wear bar, or also known as UHMW, is an extremely durable material and the lowest surface friction material produced. UHMW is very strong and slides much smoother and with far less friction on your pavement.
Why do snowblower owners upgrade to the UHMW wear bar?
They do not cause surface abrasion damage to the pavement, which is very destructive and will lead to having to replace the pavement.
UHMW is very quiet and eliminates the screeching and scraping sounds from the pavement grinding of steel surfaces.
The blower slides smoothly, easily and quietly. It makes the blower easier to push on the pavement.
They want to protect both the pavement and the snowblower from any surface friction damage.
What do you get when you order our SB2176 Snowblower UHMW wear bar kit?
A custom machined UHMW wear bar to replace the steel wear bar on your SB2176 blower.
A full set of corrosion resistant hardware to help you mount the new UHMW wear bar on your blower.
What options are there for replacing the steel blower shoes to reduce this pavement damage from the shoes making contact?
We are working on options for the existing blower shoes. The blower shoes used on this blower are a unique design and require a unique solution. Please contact us if you are looking for a low friction option for your blowers shoes. We can discuss some of the options for dealing with the blower shoe friction.
Who is a customer for this Frontier SB2176 UHMW Wear Bar and shoe kit ?
Anyone who needs to or desires to replace the steel wear bar on this snowblower.
An owner of the snowblower who wants to reduce the surface friction of their snow blower on the pavement.
Someone looking to prevent the damage to their pavement
A new owner of this blower who doesn’t want to allow the steel wear bar to cause the friction damage to their pavement.
What is the installation process to remove the steel wear bar and install the new UHMW wear bar?
The wear bar unbolts from your blower and is replaced with our new machined wear bar with the hardware included. This is a straight forward process and is simple. This should take 30 minutes or less with normal hand tools.
Always Make sure to safely support the blower when working on it. Please follow all safety procedures when working on this equipment.
Important notes and details about this product
This product is produced when ordered. Please allow 15 to 18 business days for this to ship to you.
This Product is produced when ordered due to these blowers being hydraulically driven and the additional equipment needed to operate these blowers.
When your order is placed, we will contact you to inquire about the surfaces cleared with your blower and the tractor used to operate the blower. We will make some modifications to the product to get our customers the very best product for their needs.
Also, depending upon the total volume of pavement cleared with this blower, It also may affect the total width of the UHMW blower wear edge.
The UHMW wear edge is the same width and length as the steel wear bar it replaces. But our UHMW edge is thicker and is all professionally machined to bolt right onto your snowblower. The thickness of the wear edge are based upon our customers answers to our questions.
We will ship your new UHMW wear bar as a one piece wear edge as that is the best wear edge for the blower. The package is considered “Oversize” due to the length of the wear bar and this extra cost is reflected in our products price.
If you are looking to protect the pavement you are clearing from the surface abrasion of steel on either concrete or asphalt, our UHMW edge is a great solution. It is made to be a direct replacement edge and fits perfectly on your snowblower.
Our UHMW blower shoes for this model blower remain under development, due to their unique mounting method.
Please contact us with any questions you may have.