Frontier Inverted Snow Blowers Non Marring UHMW Kit
Includes Free Ground Shipping Via USPS
Priority Mail Delivery to the Lower 48 states.
This is the kit which converts the wear bar and shoes on the Frontier SB1164P inverted snowblower from mild steel wear parts to UHMW wear parts. If you want to change the blowers surface components from mild steel to UHMW to reduce friction and also protect the pavement, this kit provides these parts.
UHMW 64” Wear bar, 5RD673609
UHMW Right Blower Skid Shoe, 5RD673621
UHMW Left Blower Skid Shoe, 5RD673606
10 piece Hardware set 3/8”-16×1.5” with bolts, flat washers, lock washer and nuts which are corrosion resistant
If you want to convert the blower from a pavement scratcher to a pavement cleaner, this is the kit you need.
UHMW is an outstanding product to reduce friction and provide long lasting wear surfaces for those in high abrasion environments. This material is very costly and also requires extensive machining, to become the useful product for your blower.
Due to this blower being relatively new and also somewhat rare, we are going to want to confirm dimensions of your blower before we custom make your product. In many ways, this inverted blower wear edge is similar to our very popular 47”, 54” and 60” Deere snow blower wear bars. We want to make sure to produce the part which will provide the optimal wear life for your pull behind, inverted snow blower.
This kit is produced when ordered so we can confirm the blowers dimensions for optimal fit. Please allow a 15 business day period from date of order until your kit is shipped. We appreciate your interest in our products.
Includes Free Ground Shipping Via USPS
Priority Mail Delivery to the Lower 48 states.
This is the kit which converts the wear bar and shoes on the Frontier SB1164P inverted snowblower from mild steel wear parts to UHMW wear parts. If you want to change the blowers surface components from mild steel to UHMW to reduce friction and also protect the pavement, this kit provides these parts.
UHMW 64” Wear bar, 5RD673609
UHMW Right Blower Skid Shoe, 5RD673621
UHMW Left Blower Skid Shoe, 5RD673606
10 piece Hardware set 3/8”-16×1.5” with bolts, flat washers, lock washer and nuts which are corrosion resistant
If you want to convert the blower from a pavement scratcher to a pavement cleaner, this is the kit you need.
UHMW is an outstanding product to reduce friction and provide long lasting wear surfaces for those in high abrasion environments. This material is very costly and also requires extensive machining, to become the useful product for your blower.
Due to this blower being relatively new and also somewhat rare, we are going to want to confirm dimensions of your blower before we custom make your product. In many ways, this inverted blower wear edge is similar to our very popular 47”, 54” and 60” Deere snow blower wear bars. We want to make sure to produce the part which will provide the optimal wear life for your pull behind, inverted snow blower.
This kit is produced when ordered so we can confirm the blowers dimensions for optimal fit. Please allow a 15 business day period from date of order until your kit is shipped. We appreciate your interest in our products.
Includes Free Ground Shipping Via USPS
Priority Mail Delivery to the Lower 48 states.
This is the kit which converts the wear bar and shoes on the Frontier SB1164P inverted snowblower from mild steel wear parts to UHMW wear parts. If you want to change the blowers surface components from mild steel to UHMW to reduce friction and also protect the pavement, this kit provides these parts.
UHMW 64” Wear bar, 5RD673609
UHMW Right Blower Skid Shoe, 5RD673621
UHMW Left Blower Skid Shoe, 5RD673606
10 piece Hardware set 3/8”-16×1.5” with bolts, flat washers, lock washer and nuts which are corrosion resistant
If you want to convert the blower from a pavement scratcher to a pavement cleaner, this is the kit you need.
UHMW is an outstanding product to reduce friction and provide long lasting wear surfaces for those in high abrasion environments. This material is very costly and also requires extensive machining, to become the useful product for your blower.
Due to this blower being relatively new and also somewhat rare, we are going to want to confirm dimensions of your blower before we custom make your product. In many ways, this inverted blower wear edge is similar to our very popular 47”, 54” and 60” Deere snow blower wear bars. We want to make sure to produce the part which will provide the optimal wear life for your pull behind, inverted snow blower.
This kit is produced when ordered so we can confirm the blowers dimensions for optimal fit. Please allow a 15 business day period from date of order until your kit is shipped. We appreciate your interest in our products.