Frontier AS11 UHMW Back Drag Shoes for 96", 108" and 120" wide Snow Pushers

$249.95

Free Ground Shipping to the lower 48 States

An important upgrade to the AS11 Snow Pushers which

  • Fits on the 96”, 108” and 120” wide AS11 snow pushers with back drag arm option.

  • Protect the pavement while back dragging snow

  • Stabilizes the AS11 snow pusher while back dragging.

  • Provides the end support on the pusher when back dragging snow to reduce the load on the back drag rubber edge.

  • Our UHMW Back Drag Shoes fill the space under the steel back drag plates when the rubber back drag edge is being used.

  • Contains the snow under the pusher end panels when using the back drag rubber edge.

  • Easy to install, requires drilling 4 mounting holes in each of the steel shoes on the front vertical panels of the Frontier AS11 snow pusher.

  • Includes Marine Grade Stainless Hardware to install the UHMW shoes on the face of the steel wear plates on each vertical end panel on the AS11 pusher.

The Frontier AS11 Series Snow Pushers offer an optional back drag arm, for which we make a rubber back drag edge. Our rubber back drag edges are listed elsewhere on our website for all of the Frontier snow pushers which offer a back drag option.

When the Frontier AS11 snow pusher is being used to back drag snow with one of our rubber edges, the ends of the snow pusher housing have steel wear plates which are floating above the pavement. As the rubber back drag edge wears, these steel plates are closer to the pavement. Also, snow can escape under the pusher end panels when the back drag arm is being used.

We make a set of UHMW back drag shoes which you can bolt onto the steel wear plates to protect the pavement against surface abrasion. Our UHMW back drag shoes include a 1” thick UHMW spacer plate to mount under our UHMW shoes to make their total wear surface taller, to align with the rubber edge of the back drag arm.

Measure your rubber back drag edge and determine the distance it extends down from the back drag arm. Then install either the base UHMW back drag shoes or include the optional spacer plate under the UHMW shoes, to make sure the UHMW shoes align with the rubber back drag edge when installed.

24” Long, 2.5” wide and 1.5” thick these UHMW back drag shoes bolt to the back drag steel shoe plates on each end of the snow pusher. In our photos, we show on the Frontier AS11 snow pusher where these UHMW back drag shoes will mount on the snow pusher.

The extra spacers under the UHMW shoes are also 2.5” wide and 3/4” thick. When used with the spacers under them, the UHMW wear bars will be 2.25” thick.

Please see the pictures of the Frontier snow Pusher back drag shoes where the UHMW shoes mount, to protect the pavement while using the back drag arm.

4 holes must be drilled in each of the back drag steel wear plates to mount these UHMW shoes.

What you receive when you order our Frontier AS11 UHMW Back Drag shoes

2- Custom machined UHMW back drag shoes 24” long, 2.5” wide and 1.5” thick.

2- 3/4” thick spacer blocks for mounting under the UHMW shoes to make the total UHMW back drag shoes 2.25” in thickness.

8- Stainless machine bolts, flat washers and Nylock nuts

Shipped to you via Ground Shipping

Benefits of Our UHMW Back Drag shoes include

  • Supports the pusher end panels during use.

  • Prevents snow from spilling out under the end panels while back dragging.

  • Prevents any pavement abrasion from the steel wear plates

  • Supports the snow pushers rubber edge to reduce unnecessary down force on the rubber back drag edge while clearing snow.

The Stainless Steel Marine Grade mounting hardware for the UHMW shoes is included with the shoes purchase. The mounting hardware is counter sunk well into the UHMW edge, to protect the pavement from the mounting hardware.

Easy to install, here are the steps to install these UHMW shoes.

  1. Unbolt the vertical steel wear plates from the end panels of the Frontier AS snow pusher. Remove them from the snow pusher.

  2. Using our UHMW shoes as the template, align the ends of our UHMW shoes with the ends of the steel wear plates. Mark and drill the 4 mounting holes in the steel wear plates on the pushers end panels.

  3. Install the UHMW shoes onto the front edge of the steel wear plates with the included hardware.

  4. Reinstall the vertical steel wear plates with the new UHMW shoes attached and facing forward.

  5. Note, some customers indicate that they mount the UHMW shoes on the vertical steel shoes while the steel shoes remain mounted on the snow pusher. It’s easier to install the hardware into the drilled holes with the steel shoes removed, but if you are able to install the UHMW shoes with the steel shoes remaining on the pusher, it will save you the step of removing and reinstalling the shoes.

Easy to install, these UHMW back drag shoes improve the performance of the AS11 snow pushers equipped with the back drag edge.

Does your AS11 Snow pusher need a new back drag rubber edge? Check out or listings for the 96”, 108” and 120” wide heavy duty rubber edges we produce, complete with all of the mounting hardware.

Free Ground Shipping to the lower 48 States

An important upgrade to the AS11 Snow Pushers which

  • Fits on the 96”, 108” and 120” wide AS11 snow pushers with back drag arm option.

  • Protect the pavement while back dragging snow

  • Stabilizes the AS11 snow pusher while back dragging.

  • Provides the end support on the pusher when back dragging snow to reduce the load on the back drag rubber edge.

  • Our UHMW Back Drag Shoes fill the space under the steel back drag plates when the rubber back drag edge is being used.

  • Contains the snow under the pusher end panels when using the back drag rubber edge.

  • Easy to install, requires drilling 4 mounting holes in each of the steel shoes on the front vertical panels of the Frontier AS11 snow pusher.

  • Includes Marine Grade Stainless Hardware to install the UHMW shoes on the face of the steel wear plates on each vertical end panel on the AS11 pusher.

The Frontier AS11 Series Snow Pushers offer an optional back drag arm, for which we make a rubber back drag edge. Our rubber back drag edges are listed elsewhere on our website for all of the Frontier snow pushers which offer a back drag option.

When the Frontier AS11 snow pusher is being used to back drag snow with one of our rubber edges, the ends of the snow pusher housing have steel wear plates which are floating above the pavement. As the rubber back drag edge wears, these steel plates are closer to the pavement. Also, snow can escape under the pusher end panels when the back drag arm is being used.

We make a set of UHMW back drag shoes which you can bolt onto the steel wear plates to protect the pavement against surface abrasion. Our UHMW back drag shoes include a 1” thick UHMW spacer plate to mount under our UHMW shoes to make their total wear surface taller, to align with the rubber edge of the back drag arm.

Measure your rubber back drag edge and determine the distance it extends down from the back drag arm. Then install either the base UHMW back drag shoes or include the optional spacer plate under the UHMW shoes, to make sure the UHMW shoes align with the rubber back drag edge when installed.

24” Long, 2.5” wide and 1.5” thick these UHMW back drag shoes bolt to the back drag steel shoe plates on each end of the snow pusher. In our photos, we show on the Frontier AS11 snow pusher where these UHMW back drag shoes will mount on the snow pusher.

The extra spacers under the UHMW shoes are also 2.5” wide and 3/4” thick. When used with the spacers under them, the UHMW wear bars will be 2.25” thick.

Please see the pictures of the Frontier snow Pusher back drag shoes where the UHMW shoes mount, to protect the pavement while using the back drag arm.

4 holes must be drilled in each of the back drag steel wear plates to mount these UHMW shoes.

What you receive when you order our Frontier AS11 UHMW Back Drag shoes

2- Custom machined UHMW back drag shoes 24” long, 2.5” wide and 1.5” thick.

2- 3/4” thick spacer blocks for mounting under the UHMW shoes to make the total UHMW back drag shoes 2.25” in thickness.

8- Stainless machine bolts, flat washers and Nylock nuts

Shipped to you via Ground Shipping

Benefits of Our UHMW Back Drag shoes include

  • Supports the pusher end panels during use.

  • Prevents snow from spilling out under the end panels while back dragging.

  • Prevents any pavement abrasion from the steel wear plates

  • Supports the snow pushers rubber edge to reduce unnecessary down force on the rubber back drag edge while clearing snow.

The Stainless Steel Marine Grade mounting hardware for the UHMW shoes is included with the shoes purchase. The mounting hardware is counter sunk well into the UHMW edge, to protect the pavement from the mounting hardware.

Easy to install, here are the steps to install these UHMW shoes.

  1. Unbolt the vertical steel wear plates from the end panels of the Frontier AS snow pusher. Remove them from the snow pusher.

  2. Using our UHMW shoes as the template, align the ends of our UHMW shoes with the ends of the steel wear plates. Mark and drill the 4 mounting holes in the steel wear plates on the pushers end panels.

  3. Install the UHMW shoes onto the front edge of the steel wear plates with the included hardware.

  4. Reinstall the vertical steel wear plates with the new UHMW shoes attached and facing forward.

  5. Note, some customers indicate that they mount the UHMW shoes on the vertical steel shoes while the steel shoes remain mounted on the snow pusher. It’s easier to install the hardware into the drilled holes with the steel shoes removed, but if you are able to install the UHMW shoes with the steel shoes remaining on the pusher, it will save you the step of removing and reinstalling the shoes.

Easy to install, these UHMW back drag shoes improve the performance of the AS11 snow pushers equipped with the back drag edge.

Does your AS11 Snow pusher need a new back drag rubber edge? Check out or listings for the 96”, 108” and 120” wide heavy duty rubber edges we produce, complete with all of the mounting hardware.