We manufacture this 5FP281104204 shoe replacement kit to replace the steel shoes on your Frontier AS10F snow pusher with shoes made of composite UHMW material. UHMW is extremely strong, very low friction and they have incredible surface wear resistance.
Stops the surface damage from the steel shoes on the pavement
No more grinding noise when the pusher is used on pavement.
No more rust on the garage floor where the pusher is parked.
Reduces the surface friction significantly, making the pusher easier to move on the surface for clearing snow and ice.
Easily, 10 minute installation with simple hand tools.
fit the 48” AS10F and the 60”AS10F Frontier Snow Pushers.
Sold in a pair, these replace the steel shoes on the snow Frontier AS10F snow pushers.
Have three mounting positions for each side of the shoe, to give you choices on the pushers ride height. Those who use their snow pushers to clear snow from grass areas like the ease of being able to simply changing the shoes ride height with two bolts per shoe.
The 3 position holes in our UHMW shoes also give you greater wear from each shoe.
Make sure you check out our rubber and UHMW pusher wear edge and optional back drag arm edges to replace the steel wear edges on your snow pusher. Replacing the steel wear edges with rubber or UHMW will totally eliminate the surface abrasion caused by the steel surfaces on the Frontier AS10F snow pusher.
When you purchase a pair of our Heavy Duty UHMW Snow Pusher Shoes, you will receive;
Two UHMW pusher shoes made the length of the pusher end panel for exceptional snow pusher stability during use.
Each side has a total of 1” thick shoes with all mounting hardware.
We use only Stainless Hardware, to provide years of corrosion free use.
The shoes are double sided so they can be flipped over and reinstalled for double the wear life.
The shoes are non side specific. You can mount either shoe on either pusher side and they are able to be rotated front and rear as well.
With normal residential use, these shoes are likely to be the last shoes many AF10F pusher owners will need to buy.
The shoes are designed to transfer between pavement types as well as to lawn areas without damaging the surface while keeping the pusher very stable.
Our shoes are made from solid UHMW material, unlike some shoes that are made from a material that has a wear edge, but then the center of the shoes has “filler material”, that makes the shoes lighter and less costly to produce.
Our shoes are made from premium UHMW material, top to bottom, front to rear and provide an excellent wear life.
A full Set of Stainless Hardware with washer and lock nuts to install the shoes securely. Our stainless hardware won’t rust or corrode.
Two Steel retaining plates made to help secure the shoes and so the shoes are clamped from mounting hole to mounting hole.
We make our shoes wider and longer than the OEM shoes as this
Makes the snow pusher easier to "square" on the pavement when cleaning.
Improves the snow pushers stability and performance by keeping the pusher squarely on the pavement surface.
handles uneven pavement surfaces better
better handle pavement repair areas and all pavement surface height variations.
skim over potholes or pavement recesses
The UHMW shoes are longer and wider than the shoes they replace, so they improve the snow pushers stability and function.
Please contact us with any questions. If you have another model snow pusher, snow blower or other snow implement with bolt on shoes and would like to stop damaging the pavement each time you clear snow, contact us and we can dis cuss make UHMW shoes for your snow clearing implement.
Thank you for interest in our products, we sincerely appreciate it.
We manufacture this 5FP281104204 shoe replacement kit to replace the steel shoes on your Frontier AS10F snow pusher with shoes made of composite UHMW material. UHMW is extremely strong, very low friction and they have incredible surface wear resistance.
Stops the surface damage from the steel shoes on the pavement
No more grinding noise when the pusher is used on pavement.
No more rust on the garage floor where the pusher is parked.
Reduces the surface friction significantly, making the pusher easier to move on the surface for clearing snow and ice.
Easily, 10 minute installation with simple hand tools.
fit the 48” AS10F and the 60”AS10F Frontier Snow Pushers.
Sold in a pair, these replace the steel shoes on the snow Frontier AS10F snow pushers.
Have three mounting positions for each side of the shoe, to give you choices on the pushers ride height. Those who use their snow pushers to clear snow from grass areas like the ease of being able to simply changing the shoes ride height with two bolts per shoe.
The 3 position holes in our UHMW shoes also give you greater wear from each shoe.
Make sure you check out our rubber and UHMW pusher wear edge and optional back drag arm edges to replace the steel wear edges on your snow pusher. Replacing the steel wear edges with rubber or UHMW will totally eliminate the surface abrasion caused by the steel surfaces on the Frontier AS10F snow pusher.
When you purchase a pair of our Heavy Duty UHMW Snow Pusher Shoes, you will receive;
Two UHMW pusher shoes made the length of the pusher end panel for exceptional snow pusher stability during use.
Each side has a total of 1” thick shoes with all mounting hardware.
We use only Stainless Hardware, to provide years of corrosion free use.
The shoes are double sided so they can be flipped over and reinstalled for double the wear life.
The shoes are non side specific. You can mount either shoe on either pusher side and they are able to be rotated front and rear as well.
With normal residential use, these shoes are likely to be the last shoes many AF10F pusher owners will need to buy.
The shoes are designed to transfer between pavement types as well as to lawn areas without damaging the surface while keeping the pusher very stable.
Our shoes are made from solid UHMW material, unlike some shoes that are made from a material that has a wear edge, but then the center of the shoes has “filler material”, that makes the shoes lighter and less costly to produce.
Our shoes are made from premium UHMW material, top to bottom, front to rear and provide an excellent wear life.
A full Set of Stainless Hardware with washer and lock nuts to install the shoes securely. Our stainless hardware won’t rust or corrode.
Two Steel retaining plates made to help secure the shoes and so the shoes are clamped from mounting hole to mounting hole.
We make our shoes wider and longer than the OEM shoes as this
Makes the snow pusher easier to "square" on the pavement when cleaning.
Improves the snow pushers stability and performance by keeping the pusher squarely on the pavement surface.
handles uneven pavement surfaces better
better handle pavement repair areas and all pavement surface height variations.
skim over potholes or pavement recesses
The UHMW shoes are longer and wider than the shoes they replace, so they improve the snow pushers stability and function.
Please contact us with any questions. If you have another model snow pusher, snow blower or other snow implement with bolt on shoes and would like to stop damaging the pavement each time you clear snow, contact us and we can dis cuss make UHMW shoes for your snow clearing implement.
Thank you for interest in our products, we sincerely appreciate it.
