Frontier AS10F Main and Back Drag Edge and Shoe Replacement Kits
Includes FREE Ground Shipping in the Lower 48 States
If you have the Frontier brand, AS10F Front End Loader Mounted Snow Pusher, we offer all of the individual parts and pieces needed to transform the snow pusher. Whether you want to replace all of the steel wear edges and surfaces with low friction materials or you just need to replace one or more of the surface cleaning edges, we have just what you need.
We sell the pieces individually or package them into complete kits to save you money. Buy one piece, or an entire transformation kit, we have just what you need.
These upgrades to this snow pusher are very popular changes to make to snow pushers as the rubber or UHMW wear edge(s)
protects the pavement against surface damage and abrasion
allows snow to be pushed onto lawn and grass areas when done carefully.
prevents pavement scuffing, asphalt sealer damage and it stops the abrasive wear on the pavement, which leaves rust marks in the concrete drives and damages the asphalt surface and sealer, requiring seasonal repairs.
cuts down on the scraping noise and banging which accompany the steel wear edge use.
It prevents the rust on the garage floor which comes from placing the steel pusher edge on the pavement when parked.
We offer the following options for our customers
You can order the Rubber Edge Only for the Main Edge, the Back Drag Edge or you can order both Edges. When you order the rubber edge only, you will receive the Rubber Edge and a full set of corrosion resistant hardware to install on the Frontier AS10F.
You can order the Rubber Edge Kit for the same options as above. When you order the Rubber Edge Kit, you receive the
professionally machined rubber edge(s) ordered and
the custom made UHMW Mounting Strap to hold the rubber edge in the snow pusher.
A Full set of the Corrosion Resistant Hardware to complete the installation.
You can order the UHMW Wear Edges, for the Main Edge, the Back Drag Edge or both Edges. When you order the UHMW wear edges you receive the custom machined UHMW wear edges and a full set of corrosion resistant hardware to install the UHMW Wear Edges. Large Fender Washers are used to properly install the UHMW wear edge in the AS10F pusher.
You can order the UHMW Snow Pusher shoes, which include the Custom Machined UHMW Shoes, Installation Mounting plates across the outside end of the UHMW shoes and a full set of Corrosion Resistant Hardware to Install the shoes.
Save up to $91 when you buy either the Complete Rubber Edge Kit and our UHMW shoe kit or our Complete UHMW Edge Kit and our UHMW shoe kit as a package, and save 10%, which is as much as $91.
That’s a great savings and removes all of the surface abrasion from the snow pusher. Quiet, Smooth, Pushes easier, ends pavement damage, improved handling. The pusher has so much less surface friction, you can run the tractor at lower RPM’s while pushing snow. I know as I use this same system myself. Win, win, win…….
How do you order what you need for your Frontier AS10F Snow Pusher?
Select the Size of your Snow Pusher, either 48” or 60”.
Review the various product offerings and prices. By clicking on the different links, you will see the price for each of those options.
When you have decided what you would like, Select those items and Add them to your Cart.
We STRONGLY encourage you to order the UHMW Shoe kit to replace the steel shoes as they are very damaging to the pavement while clearing the snow and while the snow pusher is parked in the garage, etc.
Once you have selected all of the items you desire, complete your name, address, payment information and click Order.
We will take it from there and prepare your order and ship it to you.
At any point in the process if you have questions, please feel free to contact us to ask questions. We are pleased to help.
Our rubber edge replacement is offered for the Model AS10F in both the 48” wide model as well as the 60” wide snow pusher.
Our Rubber Wear edge material is
a heavy duty rubber
6” tall and 3/4” thick to replace the steel edge in your snow pusher
Our UHMW Wear edge material is
Top Quality UHMW machined to fit each machine precisely
6” tall and 3/4” thick, to replace the steel edge in the snow pusher.
Both our Rubber or UHMW Wear edge materials offer
precision machined production, to make the installation easy
simple edge adjustments while you use the pusher thanks to our special material design and machining methods.
optimal position during use based upon the design, so both vertical and horizontal adjustments machined in the edges keep the edge square on the pavement.
Our AS10F snow pusher edges are double sided to double their functional wear life. As the edge is used, you can flip the edge over and have an entirely new wear edge to work with. This Doubles the wear life of the AS10F edge material.
Our replacement Edges include
The 48” or 60” rubber or UHMW edge to fit your snow pusher
Complete hardware to install the wear edge
Our replacement Rubber Edge Kits include
The 48” or 60” rubber main or back drag edge to fit your snow pusher
A UHMW mounting strap to secure the rubber edge properly to the snow pusher unit.
Complete hardware to install the Rubber wear edge kit
Installation and Use instructions.
Our products are all Made in America, sourced from American material sources and all production occurs in West Michigan. We proudly support our area businesses and employ locals in our business operations.
Make sure to Upgrade the Frontier AS10F Snow Pusher Shoes.
If your goal is to stop the pavement damage and surface abrasion from your Frontier Snow Pusher, make sure you order our UHMW AS10F Snow Pusher shoes, to remove the steel shoes and replace them with our low friction, UHMW pusher shoes.
This eliminates the very destructive steel pusher shoes and replaces them with custom shoes and all of the mounting hardware and plates needed, to install them. These UHMW shoes will complete the package of eliminating the steel surfaces on your pavement and replace them with a low friction, very long lasting UHMW shoe kit.
Our UHMW Shoe kit is listed as a purchase option in this product listing.
When you replace the Steel Snow Pusher Wear Bars and the Steel Shoes with either our Rubber Wear Edges or our UHMW Wear edges and UHMW Shoes, you will see a profound transformation in the function of the snow pusher. I use the rubber edges and UHMW shoes on my own snow pusher, so I speak from first hand experience.
The snow pusher
Is quiet and glides across the pavement when on the UHMW shoes and non steel (either rubber or UHMW Wear edges).
No more scraping and scratching of the wear bars on the pavement.
steers and controls MUCH better as it pushes much easier and as a result, improves the tractor’s handling.
I can’t imagine why anyone would EVER want to return to the steel wear edges and shoes, as it makes the snow pusher harder to push, poorer handling, damages the pavement, wears on the snow pusher, rust on the garage floor, all negatives from keeping the steel on snow pusher.
If you have any questions or need help when ordering, please contact us. We are pleased to help.
Includes FREE Ground Shipping in the Lower 48 States
If you have the Frontier brand, AS10F Front End Loader Mounted Snow Pusher, we offer all of the individual parts and pieces needed to transform the snow pusher. Whether you want to replace all of the steel wear edges and surfaces with low friction materials or you just need to replace one or more of the surface cleaning edges, we have just what you need.
We sell the pieces individually or package them into complete kits to save you money. Buy one piece, or an entire transformation kit, we have just what you need.
These upgrades to this snow pusher are very popular changes to make to snow pushers as the rubber or UHMW wear edge(s)
protects the pavement against surface damage and abrasion
allows snow to be pushed onto lawn and grass areas when done carefully.
prevents pavement scuffing, asphalt sealer damage and it stops the abrasive wear on the pavement, which leaves rust marks in the concrete drives and damages the asphalt surface and sealer, requiring seasonal repairs.
cuts down on the scraping noise and banging which accompany the steel wear edge use.
It prevents the rust on the garage floor which comes from placing the steel pusher edge on the pavement when parked.
We offer the following options for our customers
You can order the Rubber Edge Only for the Main Edge, the Back Drag Edge or you can order both Edges. When you order the rubber edge only, you will receive the Rubber Edge and a full set of corrosion resistant hardware to install on the Frontier AS10F.
You can order the Rubber Edge Kit for the same options as above. When you order the Rubber Edge Kit, you receive the
professionally machined rubber edge(s) ordered and
the custom made UHMW Mounting Strap to hold the rubber edge in the snow pusher.
A Full set of the Corrosion Resistant Hardware to complete the installation.
You can order the UHMW Wear Edges, for the Main Edge, the Back Drag Edge or both Edges. When you order the UHMW wear edges you receive the custom machined UHMW wear edges and a full set of corrosion resistant hardware to install the UHMW Wear Edges. Large Fender Washers are used to properly install the UHMW wear edge in the AS10F pusher.
You can order the UHMW Snow Pusher shoes, which include the Custom Machined UHMW Shoes, Installation Mounting plates across the outside end of the UHMW shoes and a full set of Corrosion Resistant Hardware to Install the shoes.
Save up to $91 when you buy either the Complete Rubber Edge Kit and our UHMW shoe kit or our Complete UHMW Edge Kit and our UHMW shoe kit as a package, and save 10%, which is as much as $91.
That’s a great savings and removes all of the surface abrasion from the snow pusher. Quiet, Smooth, Pushes easier, ends pavement damage, improved handling. The pusher has so much less surface friction, you can run the tractor at lower RPM’s while pushing snow. I know as I use this same system myself. Win, win, win…….
How do you order what you need for your Frontier AS10F Snow Pusher?
Select the Size of your Snow Pusher, either 48” or 60”.
Review the various product offerings and prices. By clicking on the different links, you will see the price for each of those options.
When you have decided what you would like, Select those items and Add them to your Cart.
We STRONGLY encourage you to order the UHMW Shoe kit to replace the steel shoes as they are very damaging to the pavement while clearing the snow and while the snow pusher is parked in the garage, etc.
Once you have selected all of the items you desire, complete your name, address, payment information and click Order.
We will take it from there and prepare your order and ship it to you.
At any point in the process if you have questions, please feel free to contact us to ask questions. We are pleased to help.
Our rubber edge replacement is offered for the Model AS10F in both the 48” wide model as well as the 60” wide snow pusher.
Our Rubber Wear edge material is
a heavy duty rubber
6” tall and 3/4” thick to replace the steel edge in your snow pusher
Our UHMW Wear edge material is
Top Quality UHMW machined to fit each machine precisely
6” tall and 3/4” thick, to replace the steel edge in the snow pusher.
Both our Rubber or UHMW Wear edge materials offer
precision machined production, to make the installation easy
simple edge adjustments while you use the pusher thanks to our special material design and machining methods.
optimal position during use based upon the design, so both vertical and horizontal adjustments machined in the edges keep the edge square on the pavement.
Our AS10F snow pusher edges are double sided to double their functional wear life. As the edge is used, you can flip the edge over and have an entirely new wear edge to work with. This Doubles the wear life of the AS10F edge material.
Our replacement Edges include
The 48” or 60” rubber or UHMW edge to fit your snow pusher
Complete hardware to install the wear edge
Our replacement Rubber Edge Kits include
The 48” or 60” rubber main or back drag edge to fit your snow pusher
A UHMW mounting strap to secure the rubber edge properly to the snow pusher unit.
Complete hardware to install the Rubber wear edge kit
Installation and Use instructions.
Our products are all Made in America, sourced from American material sources and all production occurs in West Michigan. We proudly support our area businesses and employ locals in our business operations.
Make sure to Upgrade the Frontier AS10F Snow Pusher Shoes.
If your goal is to stop the pavement damage and surface abrasion from your Frontier Snow Pusher, make sure you order our UHMW AS10F Snow Pusher shoes, to remove the steel shoes and replace them with our low friction, UHMW pusher shoes.
This eliminates the very destructive steel pusher shoes and replaces them with custom shoes and all of the mounting hardware and plates needed, to install them. These UHMW shoes will complete the package of eliminating the steel surfaces on your pavement and replace them with a low friction, very long lasting UHMW shoe kit.
Our UHMW Shoe kit is listed as a purchase option in this product listing.
When you replace the Steel Snow Pusher Wear Bars and the Steel Shoes with either our Rubber Wear Edges or our UHMW Wear edges and UHMW Shoes, you will see a profound transformation in the function of the snow pusher. I use the rubber edges and UHMW shoes on my own snow pusher, so I speak from first hand experience.
The snow pusher
Is quiet and glides across the pavement when on the UHMW shoes and non steel (either rubber or UHMW Wear edges).
No more scraping and scratching of the wear bars on the pavement.
steers and controls MUCH better as it pushes much easier and as a result, improves the tractor’s handling.
I can’t imagine why anyone would EVER want to return to the steel wear edges and shoes, as it makes the snow pusher harder to push, poorer handling, damages the pavement, wears on the snow pusher, rust on the garage floor, all negatives from keeping the steel on snow pusher.
If you have any questions or need help when ordering, please contact us. We are pleased to help.
Includes FREE Ground Shipping in the Lower 48 States
If you have the Frontier brand, AS10F Front End Loader Mounted Snow Pusher, we offer all of the individual parts and pieces needed to transform the snow pusher. Whether you want to replace all of the steel wear edges and surfaces with low friction materials or you just need to replace one or more of the surface cleaning edges, we have just what you need.
We sell the pieces individually or package them into complete kits to save you money. Buy one piece, or an entire transformation kit, we have just what you need.
These upgrades to this snow pusher are very popular changes to make to snow pushers as the rubber or UHMW wear edge(s)
protects the pavement against surface damage and abrasion
allows snow to be pushed onto lawn and grass areas when done carefully.
prevents pavement scuffing, asphalt sealer damage and it stops the abrasive wear on the pavement, which leaves rust marks in the concrete drives and damages the asphalt surface and sealer, requiring seasonal repairs.
cuts down on the scraping noise and banging which accompany the steel wear edge use.
It prevents the rust on the garage floor which comes from placing the steel pusher edge on the pavement when parked.
We offer the following options for our customers
You can order the Rubber Edge Only for the Main Edge, the Back Drag Edge or you can order both Edges. When you order the rubber edge only, you will receive the Rubber Edge and a full set of corrosion resistant hardware to install on the Frontier AS10F.
You can order the Rubber Edge Kit for the same options as above. When you order the Rubber Edge Kit, you receive the
professionally machined rubber edge(s) ordered and
the custom made UHMW Mounting Strap to hold the rubber edge in the snow pusher.
A Full set of the Corrosion Resistant Hardware to complete the installation.
You can order the UHMW Wear Edges, for the Main Edge, the Back Drag Edge or both Edges. When you order the UHMW wear edges you receive the custom machined UHMW wear edges and a full set of corrosion resistant hardware to install the UHMW Wear Edges. Large Fender Washers are used to properly install the UHMW wear edge in the AS10F pusher.
You can order the UHMW Snow Pusher shoes, which include the Custom Machined UHMW Shoes, Installation Mounting plates across the outside end of the UHMW shoes and a full set of Corrosion Resistant Hardware to Install the shoes.
Save up to $91 when you buy either the Complete Rubber Edge Kit and our UHMW shoe kit or our Complete UHMW Edge Kit and our UHMW shoe kit as a package, and save 10%, which is as much as $91.
That’s a great savings and removes all of the surface abrasion from the snow pusher. Quiet, Smooth, Pushes easier, ends pavement damage, improved handling. The pusher has so much less surface friction, you can run the tractor at lower RPM’s while pushing snow. I know as I use this same system myself. Win, win, win…….
How do you order what you need for your Frontier AS10F Snow Pusher?
Select the Size of your Snow Pusher, either 48” or 60”.
Review the various product offerings and prices. By clicking on the different links, you will see the price for each of those options.
When you have decided what you would like, Select those items and Add them to your Cart.
We STRONGLY encourage you to order the UHMW Shoe kit to replace the steel shoes as they are very damaging to the pavement while clearing the snow and while the snow pusher is parked in the garage, etc.
Once you have selected all of the items you desire, complete your name, address, payment information and click Order.
We will take it from there and prepare your order and ship it to you.
At any point in the process if you have questions, please feel free to contact us to ask questions. We are pleased to help.
Our rubber edge replacement is offered for the Model AS10F in both the 48” wide model as well as the 60” wide snow pusher.
Our Rubber Wear edge material is
a heavy duty rubber
6” tall and 3/4” thick to replace the steel edge in your snow pusher
Our UHMW Wear edge material is
Top Quality UHMW machined to fit each machine precisely
6” tall and 3/4” thick, to replace the steel edge in the snow pusher.
Both our Rubber or UHMW Wear edge materials offer
precision machined production, to make the installation easy
simple edge adjustments while you use the pusher thanks to our special material design and machining methods.
optimal position during use based upon the design, so both vertical and horizontal adjustments machined in the edges keep the edge square on the pavement.
Our AS10F snow pusher edges are double sided to double their functional wear life. As the edge is used, you can flip the edge over and have an entirely new wear edge to work with. This Doubles the wear life of the AS10F edge material.
Our replacement Edges include
The 48” or 60” rubber or UHMW edge to fit your snow pusher
Complete hardware to install the wear edge
Our replacement Rubber Edge Kits include
The 48” or 60” rubber main or back drag edge to fit your snow pusher
A UHMW mounting strap to secure the rubber edge properly to the snow pusher unit.
Complete hardware to install the Rubber wear edge kit
Installation and Use instructions.
Our products are all Made in America, sourced from American material sources and all production occurs in West Michigan. We proudly support our area businesses and employ locals in our business operations.
Make sure to Upgrade the Frontier AS10F Snow Pusher Shoes.
If your goal is to stop the pavement damage and surface abrasion from your Frontier Snow Pusher, make sure you order our UHMW AS10F Snow Pusher shoes, to remove the steel shoes and replace them with our low friction, UHMW pusher shoes.
This eliminates the very destructive steel pusher shoes and replaces them with custom shoes and all of the mounting hardware and plates needed, to install them. These UHMW shoes will complete the package of eliminating the steel surfaces on your pavement and replace them with a low friction, very long lasting UHMW shoe kit.
Our UHMW Shoe kit is listed as a purchase option in this product listing.
When you replace the Steel Snow Pusher Wear Bars and the Steel Shoes with either our Rubber Wear Edges or our UHMW Wear edges and UHMW Shoes, you will see a profound transformation in the function of the snow pusher. I use the rubber edges and UHMW shoes on my own snow pusher, so I speak from first hand experience.
The snow pusher
Is quiet and glides across the pavement when on the UHMW shoes and non steel (either rubber or UHMW Wear edges).
No more scraping and scratching of the wear bars on the pavement.
steers and controls MUCH better as it pushes much easier and as a result, improves the tractor’s handling.
I can’t imagine why anyone would EVER want to return to the steel wear edges and shoes, as it makes the snow pusher harder to push, poorer handling, damages the pavement, wears on the snow pusher, rust on the garage floor, all negatives from keeping the steel on snow pusher.
If you have any questions or need help when ordering, please contact us. We are pleased to help.
Many of these kits are stocked for quick delivery. When the kits are out of stock, we generally ship the parts within 14 business days from the date of the order. We will notify you at the time of your order regarding the shipment and order status. We will keep you updated and advise you of the date the kit is shipped and provide you with the shipping tracking numbers. Thank you for your interest in our products.