Frontier Free Stall Cleaners Complete Overhaul Kit
Edit for
60" 72" 84" 96"
Includes FREE Ground Shipping via USPS Priority Mail
delivery to the Lower 48 States
When its time to replace the AE11E Frontier Stall Cleaners rubber edges for the main edge as well as the Back Drag rubber edge, our kit is the way to save money and upgrade your Stall Cleaner to a new level of performance. This kit includes everything you need to refresh the stall cleaner to restore “Better than New” performance. This kit includes the following parts
Main Stall Cleaner Components
(1) Rubber Edge Main Stall Cleaner
(2) UHMW Edge Straps to secure the wing rubber on the main stall unit
(1) UHMW Edge Strap to secure the main unit rubber edge
(20) Hardware Units, of Bolt, flat washers, lock washers, nuts or Lock Nuts
Back Drag Arm Components
(1) Back Scraper Rubber Edge which measures
(1) Back Scraper Rubber mounting UHMW Strap, Custom Made
(24) Hardware Units of Bolt, Flat washers, Nuts or Lock Nuts
We have assembled a kit of Premium Components to make this process more efficient and Less Expensive for you. Don’t spend an entire afternoon trying to assemble the list of parts you need and then paying full price when our kit is complete and saves you 25% off the Frontier Retail Prices.
Deere’s Retail Price for these components is $1,229.95 for the 60” unit and as high as $1,740 for the 96” wide unit.
Select the specific kit you need and save on the entire kit and also get all of the pieces needed to update the rubber edges on the stall cleaner, both the base unit as well as the back drag arm’s rubber.
You save 25% off the retail price
Our kit includes all of the rubber edges, the UHMW Straps which we custom cut to fit your stall cleaner and the best hardware to make the assembly and then future adjustments of the rubber edges in your stall scraper as easy as possible.
This kit replaces all of the rubber edges, all of the straps which secure the rubber edges and all of the hardware it takes to install the straps and rubber edges. It allows you to start over with all new components. After all, if one rubber edge is worn, chances are they are all worn in similar amounts as the stall cleaner is used in the same manner every day.
Shipped complete with instructions
We are offering an incentive for those who order more than 1 stall scraper complete kit each time.
Please note, These kits are produced when ordered, so please allow us 10 to 14 business days to produce and ship your new kit to you.
We will confirm the dimensions of your stall scrapers mounting holes and bolts to make sure the kit fit properly and is easily installed.
We can accommodate custom requests to enhance the performance of the stall scrapers such as adding a UHMW Scraping edge BETWEEN two rubber edges to add additional surface cleaning capabilities. Just ask us…..
Thank you for your interest in our products.
We offer these same kits for the 72”, 84” and 96” Free Stall Cleaners
Need something for another size, brand or model of stall cleaner? We custom cut rubber products every day, to provide our customers with precisely what they need.
Please use our “Contact Us” form to contact us about any product or any custom need you might have. We always enjoy hearing from our customers.
Edit for
60" 72" 84" 96"
Includes FREE Ground Shipping via USPS Priority Mail
delivery to the Lower 48 States
When its time to replace the AE11E Frontier Stall Cleaners rubber edges for the main edge as well as the Back Drag rubber edge, our kit is the way to save money and upgrade your Stall Cleaner to a new level of performance. This kit includes everything you need to refresh the stall cleaner to restore “Better than New” performance. This kit includes the following parts
Main Stall Cleaner Components
(1) Rubber Edge Main Stall Cleaner
(2) UHMW Edge Straps to secure the wing rubber on the main stall unit
(1) UHMW Edge Strap to secure the main unit rubber edge
(20) Hardware Units, of Bolt, flat washers, lock washers, nuts or Lock Nuts
Back Drag Arm Components
(1) Back Scraper Rubber Edge which measures
(1) Back Scraper Rubber mounting UHMW Strap, Custom Made
(24) Hardware Units of Bolt, Flat washers, Nuts or Lock Nuts
We have assembled a kit of Premium Components to make this process more efficient and Less Expensive for you. Don’t spend an entire afternoon trying to assemble the list of parts you need and then paying full price when our kit is complete and saves you 25% off the Frontier Retail Prices.
Deere’s Retail Price for these components is $1,229.95 for the 60” unit and as high as $1,740 for the 96” wide unit.
Select the specific kit you need and save on the entire kit and also get all of the pieces needed to update the rubber edges on the stall cleaner, both the base unit as well as the back drag arm’s rubber.
You save 25% off the retail price
Our kit includes all of the rubber edges, the UHMW Straps which we custom cut to fit your stall cleaner and the best hardware to make the assembly and then future adjustments of the rubber edges in your stall scraper as easy as possible.
This kit replaces all of the rubber edges, all of the straps which secure the rubber edges and all of the hardware it takes to install the straps and rubber edges. It allows you to start over with all new components. After all, if one rubber edge is worn, chances are they are all worn in similar amounts as the stall cleaner is used in the same manner every day.
Shipped complete with instructions
We are offering an incentive for those who order more than 1 stall scraper complete kit each time.
Please note, These kits are produced when ordered, so please allow us 10 to 14 business days to produce and ship your new kit to you.
We will confirm the dimensions of your stall scrapers mounting holes and bolts to make sure the kit fit properly and is easily installed.
We can accommodate custom requests to enhance the performance of the stall scrapers such as adding a UHMW Scraping edge BETWEEN two rubber edges to add additional surface cleaning capabilities. Just ask us…..
Thank you for your interest in our products.
We offer these same kits for the 72”, 84” and 96” Free Stall Cleaners
Need something for another size, brand or model of stall cleaner? We custom cut rubber products every day, to provide our customers with precisely what they need.
Please use our “Contact Us” form to contact us about any product or any custom need you might have. We always enjoy hearing from our customers.
Edit for
60" 72" 84" 96"
Includes FREE Ground Shipping via USPS Priority Mail
delivery to the Lower 48 States
When its time to replace the AE11E Frontier Stall Cleaners rubber edges for the main edge as well as the Back Drag rubber edge, our kit is the way to save money and upgrade your Stall Cleaner to a new level of performance. This kit includes everything you need to refresh the stall cleaner to restore “Better than New” performance. This kit includes the following parts
Main Stall Cleaner Components
(1) Rubber Edge Main Stall Cleaner
(2) UHMW Edge Straps to secure the wing rubber on the main stall unit
(1) UHMW Edge Strap to secure the main unit rubber edge
(20) Hardware Units, of Bolt, flat washers, lock washers, nuts or Lock Nuts
Back Drag Arm Components
(1) Back Scraper Rubber Edge which measures
(1) Back Scraper Rubber mounting UHMW Strap, Custom Made
(24) Hardware Units of Bolt, Flat washers, Nuts or Lock Nuts
We have assembled a kit of Premium Components to make this process more efficient and Less Expensive for you. Don’t spend an entire afternoon trying to assemble the list of parts you need and then paying full price when our kit is complete and saves you 25% off the Frontier Retail Prices.
Deere’s Retail Price for these components is $1,229.95 for the 60” unit and as high as $1,740 for the 96” wide unit.
Select the specific kit you need and save on the entire kit and also get all of the pieces needed to update the rubber edges on the stall cleaner, both the base unit as well as the back drag arm’s rubber.
You save 25% off the retail price
Our kit includes all of the rubber edges, the UHMW Straps which we custom cut to fit your stall cleaner and the best hardware to make the assembly and then future adjustments of the rubber edges in your stall scraper as easy as possible.
This kit replaces all of the rubber edges, all of the straps which secure the rubber edges and all of the hardware it takes to install the straps and rubber edges. It allows you to start over with all new components. After all, if one rubber edge is worn, chances are they are all worn in similar amounts as the stall cleaner is used in the same manner every day.
Shipped complete with instructions
We are offering an incentive for those who order more than 1 stall scraper complete kit each time.
Please note, These kits are produced when ordered, so please allow us 10 to 14 business days to produce and ship your new kit to you.
We will confirm the dimensions of your stall scrapers mounting holes and bolts to make sure the kit fit properly and is easily installed.
We can accommodate custom requests to enhance the performance of the stall scrapers such as adding a UHMW Scraping edge BETWEEN two rubber edges to add additional surface cleaning capabilities. Just ask us…..
Thank you for your interest in our products.
We offer these same kits for the 72”, 84” and 96” Free Stall Cleaners
Need something for another size, brand or model of stall cleaner? We custom cut rubber products every day, to provide our customers with precisely what they need.
Please use our “Contact Us” form to contact us about any product or any custom need you might have. We always enjoy hearing from our customers.