Free Ground Shipping Via USPS Priority
Mail to the Lower 48 States
The Frontier AF10F plow is one of the most popular Front End Loader (FEL) mounted plows for the Deere tractors using the H120 or 120R Front End Loaders. We find our customers have various needs, so we offer 3 different rubber Plow Edge kits for this very popular plow. We also offer a UHMW Plow edge, which Deere does not offer to their customers. Let’s take a look at these products and help you determine which is best for your needs.
Let’s cut right to the heart of the matter. When you see the costs of the Frontier edge and what their kit weighs and then the weight and cost of Our Rubber Plow Edges for the Frontier AF10F, it almost looks like some type of mistake. But its not.
Our rubber plow edges are made of much heavier and dense rubber material. The higher the quality of rubber, the longer the plow edge will last. The lighter the rubber, the easier it will tear, split, crack or break. Here are the numbers which really tell the tale of this story.
Frontier Rubber Plow Edge for the AF10F Plow
6” tall, 3/4” thick and 59.5” long and weighs 7 pounds
The Frontier 5WP1044563 rubber replacement edge sells for $515
The Frontier 5WD1044513 is the complete kit, sells for $760.11
Frontier Rubber Plow Edges are much lighter in weight than the plow edges we offer. As a result, we hear often from customers about their Frontier rubber plow edges failing, whether they tear or break, the failures leave the customer in need for a new rubber or UHMW plow edge.
What Deere and Frontier Offer for the Frontier AF10F FEL Plow
Frontier and Deere offer one level of Urethane Edge kit for the Frontier AF10F plow. Here are the part numbers and the prices.
Our Base edge is our Standard edge. It’s 6”tall, 3/4” thick and 60” long. Our rubber edge weighs 12 pounds
We sell the rubber only for $295 (save $220 over Deere)
and the Entire Kit for $485 (save $270.11 over Deere)
Our Edge kits all include new hardware. We use UHMW Mounting straps that are 3/4” thick and 1.5” wide. Severe Duty Edge uses 1” thick UHMW straps that are 2” wide to secure the 1.5” thick rubber edges.
Here is a summary of our upgraded
edge kits for the Frontier AF10F Plow.
Frontier AF10F Urethane rubber, $515, entire kit $760.11
SBS, Standard Kit, rubber only $295, entire kit $485
SBS, Heavy Duty Kit, rubber only $445, entire kit $590
SBS, Severe Duty Kit, rubber only $490, entire kit $615
SBS, UHMW Edge, Residential Duty edge $445
SBS, UHMW Commercial duty Edge $550
Rubber Edge kit specifications - A comparison in Quality and Value
Frontier Edge - 59.5’” long, 6” tall, 3/4” thick, weighs 7 pounds
SBS, Stnd Kit - 59.5” long, 6” tall, 3/4” thick weighs 12 pounds
SBS, Heavy Duty, - 59.5”, 6” tall, 1.25” thick, weighs 22 pounds
SBS, Severe Duty - 59.5”, 6” tall, 1.5” thick, weighs 25 pounds
UHMW Res. Duty Edge, 59.5” long, 6” tall, 3/4” thick, 9 pounds
UHMW Comm. Duty Edge, 59.5” long, 1” thick, 12 pounds
UHMW Kits include the same UHMW edge but an upgrade to Stainless Steel hardware.
Rubber Edge and UHMW Strap sizes in our Kits.
All Include new hardware.
Standard Duty Kit
1 rubber edge, 59.5” long, 6” tall and 3/4” thick. Uses 3/4” thick UHMW straps to secure the rubber edge and standard hardware to install the new edge.
Heavy Duty Kit
2 rubber edges, one 1/2” thick x 6” tall and one 3/4” thick x 6” tall, totaling 1.25” of rubber edges. Use 3/4” thick UHMW straps and standard hardware to install the new edges on the plow.
Severe Duty Kit
2 rubber edges, each 6” tall x 3/4” thick, totaling 1.5” of rubber plow edge. Special 1” thick UHMW straps that are 2” wide. Corrosion resistant hardware to install new edge kit.
Upgrade any of the kits to Stainless hardware for a $30 up charge.
Are our plow edges “overkill” or unnecessary, where a 7 pound edge will do? No, we feel we want the most durable and reliable plow edge kit that will not disappoint the customer. We are proud of making all of our products in Michigan and not using low cost imported products.
SulleyBear Solutions product offerings for Frontier AF10F Plow
Our kits have been selling very well and we are increasing production to keep them in stock. Our customers are very pleased with our kits fit, finish and function.
Exceeded Our Goals while saving the customer money
Customer Profiles by Edge Kit Type
Our goal was to make plow edge kits to provide a range of options to the different owners of these plows on tractors. Our kits are intended for the following customers;
Standard Kit is our Residential Customer Kit for typical residential use.
Our Heavy Duty Kit is for the customer who plows their own driveway and several more in the neighborhood, Or its for Commercial Snow Clearing operators who are using their plows extensively to clear snow in the winter.
Our Extreme Duty Kit is often sold to either the customer who insists on having the very best there is or the very challenging snow clearing operation. We have sold these AF10F Extreme Duty Kits to Hospitals, School Districts, Municipalities and Medical Centers.
We have also sold several of our SBS rubber plow edge kits for the Frontier AF10F Plow to John Deere Dealers. Some were to install on their customers new tractors, some were to offer upgrades from Deere’s offerings which they sold to customers. The value of these kits compared to the Deere Frontier Kit makes these one of our top selling product lines.
Please contact us with any questions. We want to save our customers money and provide them with a superior product. That’s what we are doing with our products.
Questions or Need Help?
Need help deciding which edge type or kit might be best for you? Feel free to contact us via email or by calling our office.
SulleyBearSolutions@Gmail.com
Office Phone 269.428.9932
Since our office phone is used for more than one business, our phones are answered in the business owners name. Should you reach us after business hours, please leave a message and we will return your call.
Thank you for considering our products,
We appreciate all of our customers.
Free Ground Shipping Via USPS Priority
Mail to the Lower 48 States
The Frontier AF10F plow is one of the most popular Front End Loader (FEL) mounted plows for the Deere tractors using the H120 or 120R Front End Loaders. We find our customers have various needs, so we offer 3 different rubber Plow Edge kits for this very popular plow. We also offer a UHMW Plow edge, which Deere does not offer to their customers. Let’s take a look at these products and help you determine which is best for your needs.
Let’s cut right to the heart of the matter. When you see the costs of the Frontier edge and what their kit weighs and then the weight and cost of Our Rubber Plow Edges for the Frontier AF10F, it almost looks like some type of mistake. But its not.
Our rubber plow edges are made of much heavier and dense rubber material. The higher the quality of rubber, the longer the plow edge will last. The lighter the rubber, the easier it will tear, split, crack or break. Here are the numbers which really tell the tale of this story.
Frontier Rubber Plow Edge for the AF10F Plow
6” tall, 3/4” thick and 59.5” long and weighs 7 pounds
The Frontier 5WP1044563 rubber replacement edge sells for $515
The Frontier 5WD1044513 is the complete kit, sells for $760.11
Frontier Rubber Plow Edges are much lighter in weight than the plow edges we offer. As a result, we hear often from customers about their Frontier rubber plow edges failing, whether they tear or break, the failures leave the customer in need for a new rubber or UHMW plow edge.
What Deere and Frontier Offer for the Frontier AF10F FEL Plow
Frontier and Deere offer one level of Urethane Edge kit for the Frontier AF10F plow. Here are the part numbers and the prices.
Our Base edge is our Standard edge. It’s 6”tall, 3/4” thick and 60” long. Our rubber edge weighs 12 pounds
We sell the rubber only for $295 (save $220 over Deere)
and the Entire Kit for $485 (save $270.11 over Deere)
Our Edge kits all include new hardware. We use UHMW Mounting straps that are 3/4” thick and 1.5” wide. Severe Duty Edge uses 1” thick UHMW straps that are 2” wide to secure the 1.5” thick rubber edges.
Here is a summary of our upgraded
edge kits for the Frontier AF10F Plow.
Frontier AF10F Urethane rubber, $515, entire kit $760.11
SBS, Standard Kit, rubber only $295, entire kit $485
SBS, Heavy Duty Kit, rubber only $445, entire kit $590
SBS, Severe Duty Kit, rubber only $490, entire kit $615
SBS, UHMW Edge, Residential Duty edge $445
SBS, UHMW Commercial duty Edge $550
Rubber Edge kit specifications - A comparison in Quality and Value
Frontier Edge - 59.5’” long, 6” tall, 3/4” thick, weighs 7 pounds
SBS, Stnd Kit - 59.5” long, 6” tall, 3/4” thick weighs 12 pounds
SBS, Heavy Duty, - 59.5”, 6” tall, 1.25” thick, weighs 22 pounds
SBS, Severe Duty - 59.5”, 6” tall, 1.5” thick, weighs 25 pounds
UHMW Res. Duty Edge, 59.5” long, 6” tall, 3/4” thick, 9 pounds
UHMW Comm. Duty Edge, 59.5” long, 1” thick, 12 pounds
UHMW Kits include the same UHMW edge but an upgrade to Stainless Steel hardware.
Rubber Edge and UHMW Strap sizes in our Kits.
All Include new hardware.
Standard Duty Kit
1 rubber edge, 59.5” long, 6” tall and 3/4” thick. Uses 3/4” thick UHMW straps to secure the rubber edge and standard hardware to install the new edge.
Heavy Duty Kit
2 rubber edges, one 1/2” thick x 6” tall and one 3/4” thick x 6” tall, totaling 1.25” of rubber edges. Use 3/4” thick UHMW straps and standard hardware to install the new edges on the plow.
Severe Duty Kit
2 rubber edges, each 6” tall x 3/4” thick, totaling 1.5” of rubber plow edge. Special 1” thick UHMW straps that are 2” wide. Corrosion resistant hardware to install new edge kit.
Upgrade any of the kits to Stainless hardware for a $30 up charge.
Are our plow edges “overkill” or unnecessary, where a 7 pound edge will do? No, we feel we want the most durable and reliable plow edge kit that will not disappoint the customer. We are proud of making all of our products in Michigan and not using low cost imported products.
SulleyBear Solutions product offerings for Frontier AF10F Plow
Our kits have been selling very well and we are increasing production to keep them in stock. Our customers are very pleased with our kits fit, finish and function.
Exceeded Our Goals while saving the customer money
Customer Profiles by Edge Kit Type
Our goal was to make plow edge kits to provide a range of options to the different owners of these plows on tractors. Our kits are intended for the following customers;
Standard Kit is our Residential Customer Kit for typical residential use.
Our Heavy Duty Kit is for the customer who plows their own driveway and several more in the neighborhood, Or its for Commercial Snow Clearing operators who are using their plows extensively to clear snow in the winter.
Our Extreme Duty Kit is often sold to either the customer who insists on having the very best there is or the very challenging snow clearing operation. We have sold these AF10F Extreme Duty Kits to Hospitals, School Districts, Municipalities and Medical Centers.
We have also sold several of our SBS rubber plow edge kits for the Frontier AF10F Plow to John Deere Dealers. Some were to install on their customers new tractors, some were to offer upgrades from Deere’s offerings which they sold to customers. The value of these kits compared to the Deere Frontier Kit makes these one of our top selling product lines.
Please contact us with any questions. We want to save our customers money and provide them with a superior product. That’s what we are doing with our products.
Questions or Need Help?
Need help deciding which edge type or kit might be best for you? Feel free to contact us via email or by calling our office.
SulleyBearSolutions@Gmail.com
Office Phone 269.428.9932
Since our office phone is used for more than one business, our phones are answered in the business owners name. Should you reach us after business hours, please leave a message and we will return your call.
Thank you for considering our products,
We appreciate all of our customers.
Image 1 of 8
Image 2 of 8
Image 3 of 8
Image 4 of 8
Image 5 of 8
Image 6 of 8
Image 7 of 8
Image 8 of 8