Free Ground Shipping in the Lower 48 States
We offer a Standard Duty Rubber edge for the 60” Deere front Plow. This Standard Duty Rubber edge is made from our 3/4” thick rubber that is 4” tall.
Our Standard Duty Rubber Edge sells as a Kit for the 60” plow as the rubber edge requires a mounting strap to properly secure the rubber edge on the plow. Our Standard Duty 60” Deere Plow rubber kit includes the following;
A fully cut and machined rubber plow edge ready to install on the plow.
The standard duty edge is 3/4” thick, 4” tall and the holes are cut along the top of this rubber edge.
If you are switching your plow from the steel edge to the standard duty rubber edge, you should order our Standard Duty Rubber Edge Kit so you have everything needed to install the rubber edge on your plow and remove the steel edge from the plow.
The 60” Standard Duty rubber Edge is a REPLACEMENT EDGE ONLY for our Standard Duty Kit. When you order the “Edge Only”, you will NOT be getting the UHMW mounting strap to install the rubber on the plow. The replacement edge is to replace the rubber in our Rubber Edge Kit and for owners who already have our UHMW mounting strap.
Our 60” Plow edge Kit and our Replacement RUBBER EDGE ONLY both ship with a new hardware set to install the kit or replacement rubber edge.
If you are looking for a Double Sided rubber edge for your Deere 60” Plow, please check our Heavy Duty and Severe Duty Edge Kits for the 60” Deere plow. These are 6” tall, double sided wear edges that are either 3/4” thick or 1.25” thick, depending upon the edge selected.
Thank you for your interest in our products
Free Ground Shipping in the Lower 48 States
We offer a Standard Duty Rubber edge for the 60” Deere front Plow. This Standard Duty Rubber edge is made from our 3/4” thick rubber that is 4” tall.
Our Standard Duty Rubber Edge sells as a Kit for the 60” plow as the rubber edge requires a mounting strap to properly secure the rubber edge on the plow. Our Standard Duty 60” Deere Plow rubber kit includes the following;
A fully cut and machined rubber plow edge ready to install on the plow.
The standard duty edge is 3/4” thick, 4” tall and the holes are cut along the top of this rubber edge.
If you are switching your plow from the steel edge to the standard duty rubber edge, you should order our Standard Duty Rubber Edge Kit so you have everything needed to install the rubber edge on your plow and remove the steel edge from the plow.
The 60” Standard Duty rubber Edge is a REPLACEMENT EDGE ONLY for our Standard Duty Kit. When you order the “Edge Only”, you will NOT be getting the UHMW mounting strap to install the rubber on the plow. The replacement edge is to replace the rubber in our Rubber Edge Kit and for owners who already have our UHMW mounting strap.
Our 60” Plow edge Kit and our Replacement RUBBER EDGE ONLY both ship with a new hardware set to install the kit or replacement rubber edge.
If you are looking for a Double Sided rubber edge for your Deere 60” Plow, please check our Heavy Duty and Severe Duty Edge Kits for the 60” Deere plow. These are 6” tall, double sided wear edges that are either 3/4” thick or 1.25” thick, depending upon the edge selected.
Thank you for your interest in our products
