Deere 54" and 60" Front Heavy Duty Blower UHMW Wear bar and UHMW Shoes

Free Ground Shipping Delivery via Lower 48 States.

Do you have a Deere Front Mounted Heavy Duty Snow blower that is either 54” or 60 Inches Wide and Mounted on a front 3 Point Hitch?

If your Heavy Duty Blower model year 2017 or Newer? Then this is the listing you need for ordering the correct parts.

Not sure, make sure to check the blowers model number tag for the listed blower build year.

Still Not Sure? Simply Ask. We will help you.

This is the listing for our custom made UHMW Wear Bar and UHMW shoes to replace the steel wear bar and shoes on your blower.

This is the UHMW wear bar to replace the steel wear bars of these numbers

54” HD Blower, replaces TR116550

60” HD Blower replaces M142890

This is the UHMW Shoes to replace these steel Shoe Part Numbers

54” HD Blower, replaces AM128336, AM128337 and AUC21074

60” HD Blower replaces AM128336, AM128337, AUC2107

Switching your HD Blower from the original equipment steel wear bar and steel blower shoes achieves these benefits;

• The blower stops grinding on the pavement with the steel and quietly and smoothly glides over the pavement on the new UHMW shoes and wear edge.

• No more pavement screeching and scraping which harms the pavement.

• The blower will now push easier, much quieter and far more smoothly

• The blower will not leave rust on the pavement surface.

• The blower glides easier over the pavement since it is much easier to push.

• In many cases, the snowblower pushes so much easier, tire chains might no longer be required.

• It’s a major improvement to the blower which will protect your blower from the pavement grinding and also reduces the surface friction by up to 90% from the steel shoes and wear edge.

• Our UHMW shoes and UHMW wear bars ship with corrosion resistant hardware to make future adjustments of your wear bar and shoes easy.

Order the UHMW Wear Bar and Shoes together in our Pavement Protection Package for your specific blower and save 10% off the individual prices of the shoes and wear bar if purchased separately.

Don’t forget, we also offer the low friction and pavement protection products for Deere’s 54” and 60” Front Plows as well as Frontier Front Plows. If you are also adding a front or rear plow blade to your snow clearing implements along with the Heavy Duty Snowblower from Deere, we can also outfit the front or rear 3ph mounted blades to prevent the steel wear edge from damaging the pavement. Make sure to ask to about our blade edge products and shoes.

Commonly Asked Questions about these UHMW wear bars and shoes

Question 1. - How long will these UHMW Wear Bars and Shoes Last with normal use?

Answer 1. - Most blower owners will get many seasons of use with the UHMW wear bar and blower shoes. And our Heavy Duty wear bar and Heavy Duty shoes are all double sided and easily reversed when the first side is worn. Not on ly will our UHMW shoes and wear bar last longer than the steel shoes and wear bar they replace, but they are very likely to last twice as long due to their double sided features.

Question 2. - How long does it take to remove the steel wear bar and shoes and replace them with the new SBS UHMW Shoes and wear bar?

Answer 2. - With Basic hand tools, the wear bar and blower shoes can be replaced in under 60 minutes following the detailed instructions.

Question 3.- Does John Deere offer a low friction UHMW wear bar and shoe option for these blowers?

Answer 3.- No, they offer just the steel parts to replace the origin al parts.

Question 4. Why did SulleyBear Solutions design and create these low friction, UHMW shoes and wear bars for these blowers?

Answer 4. - Most people who clear their driveway pavement don’t want to damage their pavement when clearing snow. The steel wear edge is very abrasive and will destroy the pavement surface over time. We don’t want to damage any of the pavement we clear of snow and we have found man y owners of these blowers feels the very same way.

Question 5. - How long should I expect these new shoes and wear bar to last?

Answer 5.- If you follow our use directions, these UHMW wear bars and shoes will last twice as long as the steel shoes and steel wear edge you are replacing.

Question 7. How can you say the shoes and wear bar will last twice as long as the steel shoes and wear bar they replace?

Answer 7.- The shoes are double sided as is our UHMW wear bar. That provides you twice the wear life. Plus our shoes have more than 3x the wear surface as do the steel shoes they replace. These UHMW shoes and wear bar will last the average homeowner clearing their driveway 8 to 10 years with normal use.

Question 8. Since the UHMW is plastic, should I need to worry about breaking or damaging the shoes or wear bar?

Answer 8.- No, the UHMW is extremely strong and its also a very dense material product. The UHMW can absorb impacts which would bend or break steel. We have tested these products extensively. If your normal and proper use of our products results in the shoe or wear bar breaking, we will replace it at no charge within the first 12 months. Reality is the shoes are very unlikely to be damaged during use. The steel will bend, rust and fracture with use. The UHMW doesnt bend, can’t rust and is very unlikely to fracture.

Question 9, - What do most who switch from the steel wear bars and shoes say after using our UHMW shoes and wear bar?

Answer 9. - Most say they wish they had switched much sooner. The screeching and scraping which is like fingernails on the chalkboard are eliminated. The blowers glide smoothly, quietly and easily over the pavement.

Question 10.- Is it true than many who switch to the UHMW shoes and wear bars find their blowers push so much more easily, they no longer need tire chains or traction aids?

Answer 10. - That is a fact. The blowers slide where they can be moved by hand with the UHMW wear bar on them. The effort to push the blowers is so much less, the tractors traction needs are less. The tractor also can operate the engine at a lower speed to save fuel. All positive improvements when you get rid of the steel wear bars and edges and switch ti UHMW.

Question 11.- I am ordering a new tractor and snow blower from my Deere dealer. Can this be arranged where the dealer can install these UHMW parts for me on my new tractor while at the dealership?

Answer 11. - Certainly, the dealer can purchase the items from us and sell them to you or you can purchase these items and have us ship them to our Deere dealer. If you desire to have our new UHMW Shoes and Wear bar installed on your new blower, the dealer’s service department can easily handle this. Just ask them and either they can order from us and we will ship to them or we can ship to the dealership on your purchase, to have the parts installed. Just let us know what you would like to do.

Question 12.- Are these SulleyBear parts going to be available through my Deere dealer?

Answer 12. - We are setting up new dealership arrangements daily. Just suggest your dealer contact us and we will gladly work with them to make these great products available. After all, Deere doesn’t make any of these parts so the dealers can offer these products when Deere isn’t offering them to their customers and we will.

Other questions, please contact us.

Do you have a blower model or make which isn ‘t listed on our site, please contact us. We are adding new products weekly.

Thank You for Your Interest in Our products.