Rubber Plow Edges for Deere 48" Plow, replaces Deere M120139
Includes Free Shipping via Ground Delivery to Lower 48 States
This is our rubber plow edge ONLY for the Deere 48” Front Plows. This rubber is either in the Standard Duty or Heavy Duty Thickness. Corrosion resistant Hardware is included with your purchase.
Standard Duty 48” Plow edge is 4” tall, 1/2” thick
Heavy Duty 48” Plow edge is 4” tall and 3/4” thick for 50% more wear material on the edge.
A full set of Corrosion Resistant Hardware is Included.
This purchase does NOT include the Steel or UHMW Mounting Strap to Secure the Rubber Plow Edge on the Plow. The customer must provide their own clamping strap for properly mounting the rubber edge when ordering this item. They can use the plows steel edge strap if they follow the steps listed below.
Customers purchasing this edge have the following choices to properly secure their rubber plow edge;
Use their plows steel plow edge to hold the rubber on the plow.
Make a mounting strap to secure the rubber edge correctly.
Use Fender Washers to clamp the rubber to the plow.
Fabricate an edge of some type to hold the rubber plow edge. The rubber edge needs a solid material to help the bolts clamp the rubber edge to the plow face. This is the plow owners option, but its paramount that some type of clamping be used to hold the rubber on the plow. Do not simply try to use the carriage bolt heads on the rubber as the rubber won’t properly seat. etc.
Use great care if you plan on using the steel strap from the plow after its been used to clear snow. The strap develops a very sharp wear edge which is razor sharp and dangerous to handle, etc. Also the rubber will be damaged if the sharp edge is allowed to push into the rubber when back dragging snow, etc.
Owners with the worn steel straps can use the straps if they take these steps.
Grind down the sharp edge on the strap so its simply a flat surface which isn’t sharp or places the rubber at risk for being cut.
Use great care when handling the edge, even after removing the knife sharp edge as the worn metal straps are full of “metal splinters” which are very small and very painful to get in your hands, etc.
Paint the steel strap to prevent it from rusting. Several coats are suggested.
Mount the strap with the ground edge facing UP, towards the top of the plow and away from the rubber edge. It protects the edge from possible damage.
Make sure to not use an impact gun on the hardware as it will damage the finish and gall the hardware, causing it to cold weld the hardware. Make sure to lubricate all hardware before either assembly or when disassembling the strap clamp, etc.
Use the proper carriage bolts to fit the shanks of the bolts into the slots on the strap. Deere uses metric hardware, we include SAE hardware with our new rubber edges. Our Hardware will work with the steel plow edge if steps 1 through 6 are taken.
Important Information,
Our Rubber Plow Edge includes the following;
Standard Edge is 48” rubber plow edge, 4” tall and 1/2 thick, laser cut with mounting holes.
Heavy Duty Edge is 48” rubber plow edge, 4” tall and 3/4” thick, laser cut with mounting holes.
Corrosion Resistant Hardware Kit of bolts, washers and Nylock Nuts to properly hold the plow edge.
If you would like to purchase the kit with the mounting strap of UHMW for the 48” edge for this plow, please see the 48” Plow Edge Kits, listed on our site.
Order the Rubber Plow Edge KIT to get the Rubber Edge and our Custom Made UHMW Mounting strap and the Hardware to install the rubber edge on your plow.
Select whether you want the Standard Duty Edge Kit Thickness or the Heavy Duty Edge Kit thickness.
Excessive Down Pressure is Simply excessive and not Helpful in the implements function.
Our plow edges are designed and made to work correctly without excessive hydraulic down pressure. Excessive use of Hydraulic Down Pressure on plow edges results in premature wear on the plow edge and usually does nothing to improve the plows snow clearing performance.
Just as pushing down as hard as you can on a snow shovel handle doesn’t improve the snow clearing results, excess down pressure on the plows also simply wastes energy and wears the edge prematurely. Follow the directions, use correctly and get the best long term wear and snow clearing results.
If you still have questions after reading our enclosed installation and use instructions, call us. We will do what we can to help.
A few key points about our plow edge products you need to know.
All of our plow edges are professionally machined and ready for installation.
No need to drill, cut or modify our products, they fit perfectly because they are laser cut on computer programmed machinery.
Our edges are purposely designed for easy installation and a long wear life.
We use only the highest quality edge materials you can buy.
All plow edges are made in Western Michigan from materials all sourced in the U.S.A.
All plow edges include a full set of corrosion resistant hardware and detailed installation and use instructions for easy installation and a long wear life.
If you have questions about which plow edge material is best for YOUR needs, please see our product selection guide or you can contact us to help you select the best edge product for your needs.
When we buy something, we want it right and to fit the first time. We want your purchase from our company to be complete and have all of the parts. Easy to install, fits properly, great to use and it lasts a long time.
We have a very simple customer service policy. Treat others the way we expect to be treated ourselves. If there is a mistake or something isn’t right, we make it right with no excuses. We try hard to get everything right up front, but if something isn’t right, we will do what it takes to correct the issue.
No excuses, just getting the issue resolved and the customer happy and keep the communication open along the way.…. We return phone calls and don’t hide behind emails or voice mail. Call us if you need us and we will call you back, sometimes even on nights and holidays…….We know what its like to have a question and we do what we can to respond to customer inquires on a timely basis.
Thank you for your interest in our products. Please contact us if you have any questions or need help selecting which edge is best for your use.
Includes Free Shipping via Ground Delivery to Lower 48 States
This is our rubber plow edge ONLY for the Deere 48” Front Plows. This rubber is either in the Standard Duty or Heavy Duty Thickness. Corrosion resistant Hardware is included with your purchase.
Standard Duty 48” Plow edge is 4” tall, 1/2” thick
Heavy Duty 48” Plow edge is 4” tall and 3/4” thick for 50% more wear material on the edge.
A full set of Corrosion Resistant Hardware is Included.
This purchase does NOT include the Steel or UHMW Mounting Strap to Secure the Rubber Plow Edge on the Plow. The customer must provide their own clamping strap for properly mounting the rubber edge when ordering this item. They can use the plows steel edge strap if they follow the steps listed below.
Customers purchasing this edge have the following choices to properly secure their rubber plow edge;
Use their plows steel plow edge to hold the rubber on the plow.
Make a mounting strap to secure the rubber edge correctly.
Use Fender Washers to clamp the rubber to the plow.
Fabricate an edge of some type to hold the rubber plow edge. The rubber edge needs a solid material to help the bolts clamp the rubber edge to the plow face. This is the plow owners option, but its paramount that some type of clamping be used to hold the rubber on the plow. Do not simply try to use the carriage bolt heads on the rubber as the rubber won’t properly seat. etc.
Use great care if you plan on using the steel strap from the plow after its been used to clear snow. The strap develops a very sharp wear edge which is razor sharp and dangerous to handle, etc. Also the rubber will be damaged if the sharp edge is allowed to push into the rubber when back dragging snow, etc.
Owners with the worn steel straps can use the straps if they take these steps.
Grind down the sharp edge on the strap so its simply a flat surface which isn’t sharp or places the rubber at risk for being cut.
Use great care when handling the edge, even after removing the knife sharp edge as the worn metal straps are full of “metal splinters” which are very small and very painful to get in your hands, etc.
Paint the steel strap to prevent it from rusting. Several coats are suggested.
Mount the strap with the ground edge facing UP, towards the top of the plow and away from the rubber edge. It protects the edge from possible damage.
Make sure to not use an impact gun on the hardware as it will damage the finish and gall the hardware, causing it to cold weld the hardware. Make sure to lubricate all hardware before either assembly or when disassembling the strap clamp, etc.
Use the proper carriage bolts to fit the shanks of the bolts into the slots on the strap. Deere uses metric hardware, we include SAE hardware with our new rubber edges. Our Hardware will work with the steel plow edge if steps 1 through 6 are taken.
Important Information,
Our Rubber Plow Edge includes the following;
Standard Edge is 48” rubber plow edge, 4” tall and 1/2 thick, laser cut with mounting holes.
Heavy Duty Edge is 48” rubber plow edge, 4” tall and 3/4” thick, laser cut with mounting holes.
Corrosion Resistant Hardware Kit of bolts, washers and Nylock Nuts to properly hold the plow edge.
If you would like to purchase the kit with the mounting strap of UHMW for the 48” edge for this plow, please see the 48” Plow Edge Kits, listed on our site.
Order the Rubber Plow Edge KIT to get the Rubber Edge and our Custom Made UHMW Mounting strap and the Hardware to install the rubber edge on your plow.
Select whether you want the Standard Duty Edge Kit Thickness or the Heavy Duty Edge Kit thickness.
Excessive Down Pressure is Simply excessive and not Helpful in the implements function.
Our plow edges are designed and made to work correctly without excessive hydraulic down pressure. Excessive use of Hydraulic Down Pressure on plow edges results in premature wear on the plow edge and usually does nothing to improve the plows snow clearing performance.
Just as pushing down as hard as you can on a snow shovel handle doesn’t improve the snow clearing results, excess down pressure on the plows also simply wastes energy and wears the edge prematurely. Follow the directions, use correctly and get the best long term wear and snow clearing results.
If you still have questions after reading our enclosed installation and use instructions, call us. We will do what we can to help.
A few key points about our plow edge products you need to know.
All of our plow edges are professionally machined and ready for installation.
No need to drill, cut or modify our products, they fit perfectly because they are laser cut on computer programmed machinery.
Our edges are purposely designed for easy installation and a long wear life.
We use only the highest quality edge materials you can buy.
All plow edges are made in Western Michigan from materials all sourced in the U.S.A.
All plow edges include a full set of corrosion resistant hardware and detailed installation and use instructions for easy installation and a long wear life.
If you have questions about which plow edge material is best for YOUR needs, please see our product selection guide or you can contact us to help you select the best edge product for your needs.
When we buy something, we want it right and to fit the first time. We want your purchase from our company to be complete and have all of the parts. Easy to install, fits properly, great to use and it lasts a long time.
We have a very simple customer service policy. Treat others the way we expect to be treated ourselves. If there is a mistake or something isn’t right, we make it right with no excuses. We try hard to get everything right up front, but if something isn’t right, we will do what it takes to correct the issue.
No excuses, just getting the issue resolved and the customer happy and keep the communication open along the way.…. We return phone calls and don’t hide behind emails or voice mail. Call us if you need us and we will call you back, sometimes even on nights and holidays…….We know what its like to have a question and we do what we can to respond to customer inquires on a timely basis.
Thank you for your interest in our products. Please contact us if you have any questions or need help selecting which edge is best for your use.
Includes Free Shipping via Ground Delivery to Lower 48 States
This is our rubber plow edge ONLY for the Deere 48” Front Plows. This rubber is either in the Standard Duty or Heavy Duty Thickness. Corrosion resistant Hardware is included with your purchase.
Standard Duty 48” Plow edge is 4” tall, 1/2” thick
Heavy Duty 48” Plow edge is 4” tall and 3/4” thick for 50% more wear material on the edge.
A full set of Corrosion Resistant Hardware is Included.
This purchase does NOT include the Steel or UHMW Mounting Strap to Secure the Rubber Plow Edge on the Plow. The customer must provide their own clamping strap for properly mounting the rubber edge when ordering this item. They can use the plows steel edge strap if they follow the steps listed below.
Customers purchasing this edge have the following choices to properly secure their rubber plow edge;
Use their plows steel plow edge to hold the rubber on the plow.
Make a mounting strap to secure the rubber edge correctly.
Use Fender Washers to clamp the rubber to the plow.
Fabricate an edge of some type to hold the rubber plow edge. The rubber edge needs a solid material to help the bolts clamp the rubber edge to the plow face. This is the plow owners option, but its paramount that some type of clamping be used to hold the rubber on the plow. Do not simply try to use the carriage bolt heads on the rubber as the rubber won’t properly seat. etc.
Use great care if you plan on using the steel strap from the plow after its been used to clear snow. The strap develops a very sharp wear edge which is razor sharp and dangerous to handle, etc. Also the rubber will be damaged if the sharp edge is allowed to push into the rubber when back dragging snow, etc.
Owners with the worn steel straps can use the straps if they take these steps.
Grind down the sharp edge on the strap so its simply a flat surface which isn’t sharp or places the rubber at risk for being cut.
Use great care when handling the edge, even after removing the knife sharp edge as the worn metal straps are full of “metal splinters” which are very small and very painful to get in your hands, etc.
Paint the steel strap to prevent it from rusting. Several coats are suggested.
Mount the strap with the ground edge facing UP, towards the top of the plow and away from the rubber edge. It protects the edge from possible damage.
Make sure to not use an impact gun on the hardware as it will damage the finish and gall the hardware, causing it to cold weld the hardware. Make sure to lubricate all hardware before either assembly or when disassembling the strap clamp, etc.
Use the proper carriage bolts to fit the shanks of the bolts into the slots on the strap. Deere uses metric hardware, we include SAE hardware with our new rubber edges. Our Hardware will work with the steel plow edge if steps 1 through 6 are taken.
Important Information,
Our Rubber Plow Edge includes the following;
Standard Edge is 48” rubber plow edge, 4” tall and 1/2 thick, laser cut with mounting holes.
Heavy Duty Edge is 48” rubber plow edge, 4” tall and 3/4” thick, laser cut with mounting holes.
Corrosion Resistant Hardware Kit of bolts, washers and Nylock Nuts to properly hold the plow edge.
If you would like to purchase the kit with the mounting strap of UHMW for the 48” edge for this plow, please see the 48” Plow Edge Kits, listed on our site.
Order the Rubber Plow Edge KIT to get the Rubber Edge and our Custom Made UHMW Mounting strap and the Hardware to install the rubber edge on your plow.
Select whether you want the Standard Duty Edge Kit Thickness or the Heavy Duty Edge Kit thickness.
Excessive Down Pressure is Simply excessive and not Helpful in the implements function.
Our plow edges are designed and made to work correctly without excessive hydraulic down pressure. Excessive use of Hydraulic Down Pressure on plow edges results in premature wear on the plow edge and usually does nothing to improve the plows snow clearing performance.
Just as pushing down as hard as you can on a snow shovel handle doesn’t improve the snow clearing results, excess down pressure on the plows also simply wastes energy and wears the edge prematurely. Follow the directions, use correctly and get the best long term wear and snow clearing results.
If you still have questions after reading our enclosed installation and use instructions, call us. We will do what we can to help.
A few key points about our plow edge products you need to know.
All of our plow edges are professionally machined and ready for installation.
No need to drill, cut or modify our products, they fit perfectly because they are laser cut on computer programmed machinery.
Our edges are purposely designed for easy installation and a long wear life.
We use only the highest quality edge materials you can buy.
All plow edges are made in Western Michigan from materials all sourced in the U.S.A.
All plow edges include a full set of corrosion resistant hardware and detailed installation and use instructions for easy installation and a long wear life.
If you have questions about which plow edge material is best for YOUR needs, please see our product selection guide or you can contact us to help you select the best edge product for your needs.
When we buy something, we want it right and to fit the first time. We want your purchase from our company to be complete and have all of the parts. Easy to install, fits properly, great to use and it lasts a long time.
We have a very simple customer service policy. Treat others the way we expect to be treated ourselves. If there is a mistake or something isn’t right, we make it right with no excuses. We try hard to get everything right up front, but if something isn’t right, we will do what it takes to correct the issue.
No excuses, just getting the issue resolved and the customer happy and keep the communication open along the way.…. We return phone calls and don’t hide behind emails or voice mail. Call us if you need us and we will call you back, sometimes even on nights and holidays…….We know what its like to have a question and we do what we can to respond to customer inquires on a timely basis.
Thank you for your interest in our products. Please contact us if you have any questions or need help selecting which edge is best for your use.