Deere 48" Heavy Duty Plow Edge Kits, replaces Deere M120139
Includes Free Shipping via Ground Delivery to Lower 48 States
Get the most from your Deere 48” Front Snowplow with one of our plow edge kits. We offer plow edges of Rubber, UHMW and Steel, to replace the plow edge on your plow.
These are our Heavy Duty Kits, which use heavier materials that are thicker and will last much longer than Standard Duty edges. If you use your plow extensively and insist on the best edge made for the plow, then the Heavy Duty Kits are what you need.
If you want a lower cost option, consider our Standard Kits listed on our site. We also offer the rubber as an Edge Only, without the Mounting strap for those who have a suitable strap to properly secure the rubber plow edge.
Heavy Duty Plow Edges for the Deere 48” Plow have these dimensions
Rubber - 3/4” thick and 4” tall and includes the UHMW Mounting Strap to complete the installation.
UHMW - 3/4” thick and 3” tall
Steel - 1/8” thick and 2.25” tall made from MD400 Hardened Steel
Important Information,
Our Rubber Plow Edge KIT includes the following;
48” rubber plow edge, 4” tall and 3/4 thick, laser cut with mounting holes.
Our custom made UHMW Mounting Strap to properly hold the plow rubber on the plow.
Corrosion Resistant Hardware Kit of bolts, washers and Nylock Nuts to properly hold the plow edge.
If you would like a lower priced 48” edge for this plow, consider our Standard Duty Edges listed on our site.
We also offer our Rubber Edge ONLY, listed in another listing. This includes the very same rubber edge as our Kit and also includes the hardware. It does not include the UHMW mounting strap which is included in the kit.
Order the Rubber Plow Edge KIT to get the Rubber Edge and our Custom Made UHMW Mounting strap and the Hardware to install the rubber edge on your plow.
Our UHMW Heavy Duty edges and the MD400 Steel Plow Edges ship with the specific edge and the corrosion resistant mounting hardware. Additional mounting straps are not needed for these edges due to the rigid nature of the UHMW or Steel edges.
Our Heavy Duty Edges are made for those who use their equipment more often and who insist on the best edge available for their plow. Our Heavy Duty Edges will last years with proper use.
Excessive Down Pressure is Simply excessive and not Helpful in the implements function.
Our plow edges are designed and made to work correctly without excessive hydraulic down pressure. Excessive use of Hydraulic Down Pressure on plow edges results in premature wear on the plow edge and usually does nothing to improve the plows snow clearing performance.
Just as pushing down as hard as you can on a snow shovel handle doesn’t improve the snow clearing results, excess down pressure on the plows also simply wastes energy and wears the edge prematurely. Follow the directions, use correctly and get the best long term wear and snow clearing results.
If you still have questions after reading our enclosed installation and use instructions, call us. We will do what we can to help.
We offer edges for your 48” Deere Front Plow to meet all plow owners needs and concerns. A few key points about our plow edge products you need to know.
All of our plow edges are professionally machined and ready for installation.
No need to drill, cut or modify our products, they fit perfectly because they are laser cut on computer programmed machinery.
Our edges are purposely designed for easy installation and a long wear life.
We use only the highest quality edge materials you can buy.
All plow edges are made in Western Michigan from materials all sourced in the U.S.A.
All plow edges include a full set of corrosion resistant hardware and detailed installation and use instructions for easy installation and a long wear life.
If you have questions about which plow edge material is best for YOUR needs, please see our product selection guide or you can contact us to help you select the best edge product for your needs.
Shipped In a One Length Piece For a Reason
Now, this is really important when you are purchasing your plow edge. We make and ship ALL of our Plow edges in a single length piece. We don’t cut our plow edge into shorter pieces to save money on shipping. Some sellers do send you various parts and pieces to put together and then you have to drill the holes and get everything mounted to create your edge. Not us.
When our clients receive their shipment from us, they are going to be able to open the box and install it on their plow, pusher or blower. No drilling, no cutting, no projects. I wouldn’t want to receive a box of random parts I need to cut and drill and assemble, especially when many charge MORE for the kits than we do for the precision made edge..
When we buy something, we want it right and to fit the first time. We want the kit to be complete and have all of the parts. Easy to install, great to use and it lasts a long time.
We have a very simple customer service policy. Treat others the way we expect to be treated ourselves. If there is a mistake or something isn’t right, we make it right and no excuses. We try hard to get everything right up front, but if something isn’t right, we will do what it takes to correct the issue.
No excuses, just getting the issue resolved and the customer happy and keep the communication open along the way.…. We return phone calls and don’t hide behind emails or voice mail. Call us if you need us and we will call you back, sometimes even on nights and holidays……..
Thank you for your interest in our products. Please contact us if you have any questions or need help selecting which edge is best for your use.
Includes Free Shipping via Ground Delivery to Lower 48 States
Get the most from your Deere 48” Front Snowplow with one of our plow edge kits. We offer plow edges of Rubber, UHMW and Steel, to replace the plow edge on your plow.
These are our Heavy Duty Kits, which use heavier materials that are thicker and will last much longer than Standard Duty edges. If you use your plow extensively and insist on the best edge made for the plow, then the Heavy Duty Kits are what you need.
If you want a lower cost option, consider our Standard Kits listed on our site. We also offer the rubber as an Edge Only, without the Mounting strap for those who have a suitable strap to properly secure the rubber plow edge.
Heavy Duty Plow Edges for the Deere 48” Plow have these dimensions
Rubber - 3/4” thick and 4” tall and includes the UHMW Mounting Strap to complete the installation.
UHMW - 3/4” thick and 3” tall
Steel - 1/8” thick and 2.25” tall made from MD400 Hardened Steel
Important Information,
Our Rubber Plow Edge KIT includes the following;
48” rubber plow edge, 4” tall and 3/4 thick, laser cut with mounting holes.
Our custom made UHMW Mounting Strap to properly hold the plow rubber on the plow.
Corrosion Resistant Hardware Kit of bolts, washers and Nylock Nuts to properly hold the plow edge.
If you would like a lower priced 48” edge for this plow, consider our Standard Duty Edges listed on our site.
We also offer our Rubber Edge ONLY, listed in another listing. This includes the very same rubber edge as our Kit and also includes the hardware. It does not include the UHMW mounting strap which is included in the kit.
Order the Rubber Plow Edge KIT to get the Rubber Edge and our Custom Made UHMW Mounting strap and the Hardware to install the rubber edge on your plow.
Our UHMW Heavy Duty edges and the MD400 Steel Plow Edges ship with the specific edge and the corrosion resistant mounting hardware. Additional mounting straps are not needed for these edges due to the rigid nature of the UHMW or Steel edges.
Our Heavy Duty Edges are made for those who use their equipment more often and who insist on the best edge available for their plow. Our Heavy Duty Edges will last years with proper use.
Excessive Down Pressure is Simply excessive and not Helpful in the implements function.
Our plow edges are designed and made to work correctly without excessive hydraulic down pressure. Excessive use of Hydraulic Down Pressure on plow edges results in premature wear on the plow edge and usually does nothing to improve the plows snow clearing performance.
Just as pushing down as hard as you can on a snow shovel handle doesn’t improve the snow clearing results, excess down pressure on the plows also simply wastes energy and wears the edge prematurely. Follow the directions, use correctly and get the best long term wear and snow clearing results.
If you still have questions after reading our enclosed installation and use instructions, call us. We will do what we can to help.
We offer edges for your 48” Deere Front Plow to meet all plow owners needs and concerns. A few key points about our plow edge products you need to know.
All of our plow edges are professionally machined and ready for installation.
No need to drill, cut or modify our products, they fit perfectly because they are laser cut on computer programmed machinery.
Our edges are purposely designed for easy installation and a long wear life.
We use only the highest quality edge materials you can buy.
All plow edges are made in Western Michigan from materials all sourced in the U.S.A.
All plow edges include a full set of corrosion resistant hardware and detailed installation and use instructions for easy installation and a long wear life.
If you have questions about which plow edge material is best for YOUR needs, please see our product selection guide or you can contact us to help you select the best edge product for your needs.
Shipped In a One Length Piece For a Reason
Now, this is really important when you are purchasing your plow edge. We make and ship ALL of our Plow edges in a single length piece. We don’t cut our plow edge into shorter pieces to save money on shipping. Some sellers do send you various parts and pieces to put together and then you have to drill the holes and get everything mounted to create your edge. Not us.
When our clients receive their shipment from us, they are going to be able to open the box and install it on their plow, pusher or blower. No drilling, no cutting, no projects. I wouldn’t want to receive a box of random parts I need to cut and drill and assemble, especially when many charge MORE for the kits than we do for the precision made edge..
When we buy something, we want it right and to fit the first time. We want the kit to be complete and have all of the parts. Easy to install, great to use and it lasts a long time.
We have a very simple customer service policy. Treat others the way we expect to be treated ourselves. If there is a mistake or something isn’t right, we make it right and no excuses. We try hard to get everything right up front, but if something isn’t right, we will do what it takes to correct the issue.
No excuses, just getting the issue resolved and the customer happy and keep the communication open along the way.…. We return phone calls and don’t hide behind emails or voice mail. Call us if you need us and we will call you back, sometimes even on nights and holidays……..
Thank you for your interest in our products. Please contact us if you have any questions or need help selecting which edge is best for your use.
Includes Free Shipping via Ground Delivery to Lower 48 States
Get the most from your Deere 48” Front Snowplow with one of our plow edge kits. We offer plow edges of Rubber, UHMW and Steel, to replace the plow edge on your plow.
These are our Heavy Duty Kits, which use heavier materials that are thicker and will last much longer than Standard Duty edges. If you use your plow extensively and insist on the best edge made for the plow, then the Heavy Duty Kits are what you need.
If you want a lower cost option, consider our Standard Kits listed on our site. We also offer the rubber as an Edge Only, without the Mounting strap for those who have a suitable strap to properly secure the rubber plow edge.
Heavy Duty Plow Edges for the Deere 48” Plow have these dimensions
Rubber - 3/4” thick and 4” tall and includes the UHMW Mounting Strap to complete the installation.
UHMW - 3/4” thick and 3” tall
Steel - 1/8” thick and 2.25” tall made from MD400 Hardened Steel
Important Information,
Our Rubber Plow Edge KIT includes the following;
48” rubber plow edge, 4” tall and 3/4 thick, laser cut with mounting holes.
Our custom made UHMW Mounting Strap to properly hold the plow rubber on the plow.
Corrosion Resistant Hardware Kit of bolts, washers and Nylock Nuts to properly hold the plow edge.
If you would like a lower priced 48” edge for this plow, consider our Standard Duty Edges listed on our site.
We also offer our Rubber Edge ONLY, listed in another listing. This includes the very same rubber edge as our Kit and also includes the hardware. It does not include the UHMW mounting strap which is included in the kit.
Order the Rubber Plow Edge KIT to get the Rubber Edge and our Custom Made UHMW Mounting strap and the Hardware to install the rubber edge on your plow.
Our UHMW Heavy Duty edges and the MD400 Steel Plow Edges ship with the specific edge and the corrosion resistant mounting hardware. Additional mounting straps are not needed for these edges due to the rigid nature of the UHMW or Steel edges.
Our Heavy Duty Edges are made for those who use their equipment more often and who insist on the best edge available for their plow. Our Heavy Duty Edges will last years with proper use.
Excessive Down Pressure is Simply excessive and not Helpful in the implements function.
Our plow edges are designed and made to work correctly without excessive hydraulic down pressure. Excessive use of Hydraulic Down Pressure on plow edges results in premature wear on the plow edge and usually does nothing to improve the plows snow clearing performance.
Just as pushing down as hard as you can on a snow shovel handle doesn’t improve the snow clearing results, excess down pressure on the plows also simply wastes energy and wears the edge prematurely. Follow the directions, use correctly and get the best long term wear and snow clearing results.
If you still have questions after reading our enclosed installation and use instructions, call us. We will do what we can to help.
We offer edges for your 48” Deere Front Plow to meet all plow owners needs and concerns. A few key points about our plow edge products you need to know.
All of our plow edges are professionally machined and ready for installation.
No need to drill, cut or modify our products, they fit perfectly because they are laser cut on computer programmed machinery.
Our edges are purposely designed for easy installation and a long wear life.
We use only the highest quality edge materials you can buy.
All plow edges are made in Western Michigan from materials all sourced in the U.S.A.
All plow edges include a full set of corrosion resistant hardware and detailed installation and use instructions for easy installation and a long wear life.
If you have questions about which plow edge material is best for YOUR needs, please see our product selection guide or you can contact us to help you select the best edge product for your needs.
Shipped In a One Length Piece For a Reason
Now, this is really important when you are purchasing your plow edge. We make and ship ALL of our Plow edges in a single length piece. We don’t cut our plow edge into shorter pieces to save money on shipping. Some sellers do send you various parts and pieces to put together and then you have to drill the holes and get everything mounted to create your edge. Not us.
When our clients receive their shipment from us, they are going to be able to open the box and install it on their plow, pusher or blower. No drilling, no cutting, no projects. I wouldn’t want to receive a box of random parts I need to cut and drill and assemble, especially when many charge MORE for the kits than we do for the precision made edge..
When we buy something, we want it right and to fit the first time. We want the kit to be complete and have all of the parts. Easy to install, great to use and it lasts a long time.
We have a very simple customer service policy. Treat others the way we expect to be treated ourselves. If there is a mistake or something isn’t right, we make it right and no excuses. We try hard to get everything right up front, but if something isn’t right, we will do what it takes to correct the issue.
No excuses, just getting the issue resolved and the customer happy and keep the communication open along the way.…. We return phone calls and don’t hide behind emails or voice mail. Call us if you need us and we will call you back, sometimes even on nights and holidays……..
Thank you for your interest in our products. Please contact us if you have any questions or need help selecting which edge is best for your use.