BigToolRack UHMW Plow Edge Kit
Free Shipping via Ground Delivery to the Lower 48 States
Turn your Big Tool Rack Plow into a pavement clearing beast without the surface abrasion to the pavement which comes from using the steel plow edge. Why do plow owners remove their steel plow edge and replace them with the UHMW Plow Edge?
To end the pavement abrasion to cement, asphalt, etc which comes from the steel plow edge grinding and scraping the pavement surface.
To prevent the damage to asphalt which results in the sealer being damaged and requiring repair or resealing. It also protects the aggregate layer in asphalt to prevent the pavement from “unraveling”.
Stops the banging of the steel edge on the pavement.
Eliminates the rust on the garage floor from the steel plow edge.
Our UHMW Edges are
Shipped to you ready to install on your plow.
The UHMW is cut to length
The holes are professionally machined into the UHMW for easy installation.
We send you the UHMW edge with the hardware to install it.
The process of installing this edge is very simple and most edges can be installed in 20 to 30 minutes, including removing the steel plow edge.
Here is the breakdown of the size of our UHMW for these Plows.
Standard Duty Edges are 5” tall and 1” thick UHMW.
Commercial Duty Edges are 6” tall and 1.25” thick UHMW
Which Edge Category is right for you?
Standard Duty UHMW Edges are for the typical residential use of the plow. Ideal for the owners driveway and a couple of neighbors drives. If you use your tractor and plow for snow clearing up to 100 machine hours per year, the standard duty UHMW edge is ideal for you.
Commercial Duty UHMW Edges are for heavy residential use or light duty commercial use. These edges are intended to be used up to 150 hours per winter plowing snow.
If you have snow clearing use which exceeds 150 hours in the winter season, contact us and we will build a UHMW edge to meet your needs.
Important details to be aware of regarding your UHMW Plow Edge
It will ship with corrosion resistant mounting hardware. We use cap screws, fender washers and flat washers and lock nuts.
The UHMW will be cut to length and all mounting holes professionally machined into the edge for easy installation.
The longer length UHMW edges will be cut into 2 pieces for shorter lengths for shipping and easier installation.
If the edge is cut, its location of the cut is carefully chosen so the seam is properly supported by the mounting hardware.
We use black reprocessed UHMW which is the most common product used for plow edges.
Our edge will have instructions for installation and use.
Depending upon inventory levels, your edge may have to be produced when ordered. Please allow 12 to 15 business days for the production and machining of your item to prepare for shipment to you.
Thank you for your interest in our products.
Free Shipping via Ground Delivery to the Lower 48 States
Turn your Big Tool Rack Plow into a pavement clearing beast without the surface abrasion to the pavement which comes from using the steel plow edge. Why do plow owners remove their steel plow edge and replace them with the UHMW Plow Edge?
To end the pavement abrasion to cement, asphalt, etc which comes from the steel plow edge grinding and scraping the pavement surface.
To prevent the damage to asphalt which results in the sealer being damaged and requiring repair or resealing. It also protects the aggregate layer in asphalt to prevent the pavement from “unraveling”.
Stops the banging of the steel edge on the pavement.
Eliminates the rust on the garage floor from the steel plow edge.
Our UHMW Edges are
Shipped to you ready to install on your plow.
The UHMW is cut to length
The holes are professionally machined into the UHMW for easy installation.
We send you the UHMW edge with the hardware to install it.
The process of installing this edge is very simple and most edges can be installed in 20 to 30 minutes, including removing the steel plow edge.
Here is the breakdown of the size of our UHMW for these Plows.
Standard Duty Edges are 5” tall and 1” thick UHMW.
Commercial Duty Edges are 6” tall and 1.25” thick UHMW
Which Edge Category is right for you?
Standard Duty UHMW Edges are for the typical residential use of the plow. Ideal for the owners driveway and a couple of neighbors drives. If you use your tractor and plow for snow clearing up to 100 machine hours per year, the standard duty UHMW edge is ideal for you.
Commercial Duty UHMW Edges are for heavy residential use or light duty commercial use. These edges are intended to be used up to 150 hours per winter plowing snow.
If you have snow clearing use which exceeds 150 hours in the winter season, contact us and we will build a UHMW edge to meet your needs.
Important details to be aware of regarding your UHMW Plow Edge
It will ship with corrosion resistant mounting hardware. We use cap screws, fender washers and flat washers and lock nuts.
The UHMW will be cut to length and all mounting holes professionally machined into the edge for easy installation.
The longer length UHMW edges will be cut into 2 pieces for shorter lengths for shipping and easier installation.
If the edge is cut, its location of the cut is carefully chosen so the seam is properly supported by the mounting hardware.
We use black reprocessed UHMW which is the most common product used for plow edges.
Our edge will have instructions for installation and use.
Depending upon inventory levels, your edge may have to be produced when ordered. Please allow 12 to 15 business days for the production and machining of your item to prepare for shipment to you.
Thank you for your interest in our products.
Free Shipping via Ground Delivery to the Lower 48 States
Turn your Big Tool Rack Plow into a pavement clearing beast without the surface abrasion to the pavement which comes from using the steel plow edge. Why do plow owners remove their steel plow edge and replace them with the UHMW Plow Edge?
To end the pavement abrasion to cement, asphalt, etc which comes from the steel plow edge grinding and scraping the pavement surface.
To prevent the damage to asphalt which results in the sealer being damaged and requiring repair or resealing. It also protects the aggregate layer in asphalt to prevent the pavement from “unraveling”.
Stops the banging of the steel edge on the pavement.
Eliminates the rust on the garage floor from the steel plow edge.
Our UHMW Edges are
Shipped to you ready to install on your plow.
The UHMW is cut to length
The holes are professionally machined into the UHMW for easy installation.
We send you the UHMW edge with the hardware to install it.
The process of installing this edge is very simple and most edges can be installed in 20 to 30 minutes, including removing the steel plow edge.
Here is the breakdown of the size of our UHMW for these Plows.
Standard Duty Edges are 5” tall and 1” thick UHMW.
Commercial Duty Edges are 6” tall and 1.25” thick UHMW
Which Edge Category is right for you?
Standard Duty UHMW Edges are for the typical residential use of the plow. Ideal for the owners driveway and a couple of neighbors drives. If you use your tractor and plow for snow clearing up to 100 machine hours per year, the standard duty UHMW edge is ideal for you.
Commercial Duty UHMW Edges are for heavy residential use or light duty commercial use. These edges are intended to be used up to 150 hours per winter plowing snow.
If you have snow clearing use which exceeds 150 hours in the winter season, contact us and we will build a UHMW edge to meet your needs.
Important details to be aware of regarding your UHMW Plow Edge
It will ship with corrosion resistant mounting hardware. We use cap screws, fender washers and flat washers and lock nuts.
The UHMW will be cut to length and all mounting holes professionally machined into the edge for easy installation.
The longer length UHMW edges will be cut into 2 pieces for shorter lengths for shipping and easier installation.
If the edge is cut, its location of the cut is carefully chosen so the seam is properly supported by the mounting hardware.
We use black reprocessed UHMW which is the most common product used for plow edges.
Our edge will have instructions for installation and use.
Depending upon inventory levels, your edge may have to be produced when ordered. Please allow 12 to 15 business days for the production and machining of your item to prepare for shipment to you.
Thank you for your interest in our products.
Many products are made when ordered. Please provide 14 business days for your order to ship. We will advise you of the shipping date and provide tracking information. If you have an urgent need, please let us know and we will attempt to move the production up in the schedule to help get you the parts you need. Thank You.