Free Ground Shipping via UPS Delivery
Do you have a 42” Deere front snow plow blade, Model 20 made to use on the earlier model 108, 111, 111H, 112L, 116, 116H, 130, 160, 165, 170, 175, 180 or 185 model garden tractors? Are the original part numbers for your plows steel strap M40581 and now its been updated with the M75675 Steel Strap? Or do you have a Model 21 Plow, used on the tractor models listed at the bottom of this listing? Then these plow edge should be for your plow.
Please see the complete fitment list at the bottom of this listing…..
Please note, due to limited demand for these edges, we make them when ordered. Please allow a 7 to 10 business day time period for us to make these edges to ship to you.
Rubber or UHMW, Which Plow edge material is for you?
We offer the replacement plow edges for your tractors blade. We make these edges in the rubber plow edge squeegee edge to replace the rubber edge Deere sells.
How about a UHMW (Ultra High Molecular Weight) composite edge, that will scrape like steel but not damage the asphalt or concrete surface the way steel edges cause surface abrasion.
Select the Plow Edge which best meets your need. Here is a description of each edge kit, what they contain and how they are best used.
Rubber Squeegee Edge ONLY, to replace AM31509
this is our 4” tall x 1/2” thick rubber edge made from proper rubber density for use as a plow edge. The original Deere plow edge was 3” tall and roughly 3/8” thick. Our rubber is more dense and heavier than the Deere rubber edges.
This is a professionally made plow rubber squeegee, with machine cut mounting holes to make the mounting easy. This rubber edge is shipped with (7) carriage bolts, (7) Flat washers and (7) Lock nuts for installing this edge. This is the replacement rubber squeegee and new hardware, for those who have the mounting strap to install this edge on their plow.
Heavy Duty Rubber Plow Edge for a Premium Edge;
Our Heavy Duty Rubber Edge for this plow is made from our 4” tall by 3/4” thick rubber edge. This edge is ideal for more frequent use or multiple driveway clearings per snowfall. Also, this edge is often preferred by the owners who like to have the very best edge for their plow.
Please note, these listings are for the rubber edge and bolts only. You will have to either use your plows steel plow edge as the strap to mount this rubber edge or fabricate a strap to hold the rubber squeegee on the plow.
If you don’t have a steel plow edge, don’t want to fabricate your own strap or you would like to purchase the entire kit so you have everything needed to switch from the steel plow edge to the rubber squeegee, then order our Complete Rubber Plow Edge Squeegee Kit.
Complete Rubber Plow Edge Squeegee Kit. (replaces AM31509 squeegee)
The SBS, LLC Complete Rubber Plow Edge Squeegee Kit includes everything you need to switch the plow from the steel plow edge to using our rubber plow edge squeegee. Our complete kit includes the following;
1- Standard Duty custom cut rubber plow edge squeegee that is 4” tall by 1/2” thick, machine cut to fit the plow. All mounting holes are machined into the rubber edge.
OR
1.- Heavy Duty rubber plow edge that is 4” tall x 3/4” thick and fully machined to mount directly on your plow.
AND
1- Custom made UHMW mounting strap, to properly secure the rubber squeegee to the plow moldboard. The UHMW strap is to hold the rubber on the plow, it is NOT designed to be used as a plow edge on its own. We make a UHMW Plow edge that is sold below for those seeking a UHMW edge to clear their driveway and pavement surfaces.
(7) Carriage bolts, (7) Flat washers, (7) Lock nuts for installing this kit.. Includes installation and use instructions.
Note, the UHMW strap is a rubber edge clamping strap ONLY, it is not intended to be used for clearing snow on the pavement with the strap. It is made purely to hold the rubber edge on the plow properly for those plow owners who don’t have a metal plow edge or those who don’t want to fabricate their own steel edge mounting strap.
If you would like to use a UHMW edge, our UHMW edges for this plow are listed below.
UHMW Custom Made Plow Edge Kit
Deere never made a UHMW plow edge for this plow. We make this edge for those who want to scrape the pavement like they are using a steel edge, but they want the protection against surface abrasion that steel edges can cause to asphalt, concrete and any hard surface. UHMW is the answer. Our edge is machine cut to perfectly fit the plow.
We offer two UHMW Edge kits for this Plow, a single side UHMW wear edge and our Double Sided UHMW Plow edge.
Single Side UHMW Plow Edge Kit includes;
(1) UHMW Plow Edge machined to fit this plow. The UHMW is 2.5” tall and 1/2” thick. All mounting slots are machined to properly hold the carriage bolts to install this edge on the plow.
Double Side UHMW Plow Edge Kit includes;
(1) UHMW Plow Edge machined to fit this plow. The UHMW is 5” tall and 1/2” thick. All mounting slots are machined down the center of this wear edge to provide two wear edges and to properly hold the carriage bolts to install this edge on the plow.
Either UHMW Plow Edge kit ships with;
(7) Carriage bolts, (7) Flat washer and (7) Lock nuts to install this plow edge. Includes installation and use instructions.
Special Note.
If you are going to use your plows original steel plow edge to mount these rubber plow edges, make sure you take these steps to protect your plow edge and get the best results.
Flip the steel edge upside down so the sharp side from grinding on the road, faces the top of the plow and isn’t against the rubber at the base of the plow.
Paint the bare metal on the metal strap to prevent rust and corrosion.
Make sure to mount the strap so the sharp side isn’t towards the bottom of the plow as we don’t want the rubber to flex forward and backward against the sharp edge.
Also make sure the bottom of the steel strap is at least 1” above the bottom of the new rubber edge when installed.
Which Plow Edge is right for you?
The following uses are best suited for these plow edges.
Rubber Plow Squeegee Edge
Pavement which you want to protect from damage
Uneven pavement surfaces that have repairs or surface damage
Clearing grass areas, the rubber edge works great for clearing lawn, grass, and areas where you don’t want to strip the surface.
Gravel and stone drives as the rubber displaces less of the surface material than will the other plow edges.
Surfaces with numerous joints or edges, such as brick pavers, landscape stones, custom or hand laid surfaces, etc.
UHMW Plow Edge
Have questions or need help selecting the best plow edge kit for your use? Contact us, we will gladly discuss your needs and concerns with you. You may call our office or send an email and we will help address your concerns.
Thank you for your interest in our products.
American Made products produced in Michigan by Small Business
These parts fit the 42” Series Model 20 Plow used on the Deere 108, 111, 111H, 112L, 116, 116H, 130, 160, 165, 170, 175, 180 or 185 model garden tractors
These parts also fit the Model 21 Plow used on the Deere LX172, LX173, LX176, LX178, LX188, LX255, LX277, LX288 GT Series and 320.
These parts also fit the Model 22 Plow used on the Deere LT133, LT155, LT166 and LTR155 and LTR166.
Please double check your parts book to make sure your plow meets the descriptions used in this listing.
Free Ground Shipping via UPS Delivery
Do you have a 42” Deere front snow plow blade, Model 20 made to use on the earlier model 108, 111, 111H, 112L, 116, 116H, 130, 160, 165, 170, 175, 180 or 185 model garden tractors? Are the original part numbers for your plows steel strap M40581 and now its been updated with the M75675 Steel Strap? Or do you have a Model 21 Plow, used on the tractor models listed at the bottom of this listing? Then these plow edge should be for your plow.
Please see the complete fitment list at the bottom of this listing…..
Please note, due to limited demand for these edges, we make them when ordered. Please allow a 7 to 10 business day time period for us to make these edges to ship to you.
Rubber or UHMW, Which Plow edge material is for you?
We offer the replacement plow edges for your tractors blade. We make these edges in the rubber plow edge squeegee edge to replace the rubber edge Deere sells.
How about a UHMW (Ultra High Molecular Weight) composite edge, that will scrape like steel but not damage the asphalt or concrete surface the way steel edges cause surface abrasion.
Select the Plow Edge which best meets your need. Here is a description of each edge kit, what they contain and how they are best used.
Rubber Squeegee Edge ONLY, to replace AM31509
this is our 4” tall x 1/2” thick rubber edge made from proper rubber density for use as a plow edge. The original Deere plow edge was 3” tall and roughly 3/8” thick. Our rubber is more dense and heavier than the Deere rubber edges.
This is a professionally made plow rubber squeegee, with machine cut mounting holes to make the mounting easy. This rubber edge is shipped with (7) carriage bolts, (7) Flat washers and (7) Lock nuts for installing this edge. This is the replacement rubber squeegee and new hardware, for those who have the mounting strap to install this edge on their plow.
Heavy Duty Rubber Plow Edge for a Premium Edge;
Our Heavy Duty Rubber Edge for this plow is made from our 4” tall by 3/4” thick rubber edge. This edge is ideal for more frequent use or multiple driveway clearings per snowfall. Also, this edge is often preferred by the owners who like to have the very best edge for their plow.
Please note, these listings are for the rubber edge and bolts only. You will have to either use your plows steel plow edge as the strap to mount this rubber edge or fabricate a strap to hold the rubber squeegee on the plow.
If you don’t have a steel plow edge, don’t want to fabricate your own strap or you would like to purchase the entire kit so you have everything needed to switch from the steel plow edge to the rubber squeegee, then order our Complete Rubber Plow Edge Squeegee Kit.
Complete Rubber Plow Edge Squeegee Kit. (replaces AM31509 squeegee)
The SBS, LLC Complete Rubber Plow Edge Squeegee Kit includes everything you need to switch the plow from the steel plow edge to using our rubber plow edge squeegee. Our complete kit includes the following;
1- Standard Duty custom cut rubber plow edge squeegee that is 4” tall by 1/2” thick, machine cut to fit the plow. All mounting holes are machined into the rubber edge.
OR
1.- Heavy Duty rubber plow edge that is 4” tall x 3/4” thick and fully machined to mount directly on your plow.
AND
1- Custom made UHMW mounting strap, to properly secure the rubber squeegee to the plow moldboard. The UHMW strap is to hold the rubber on the plow, it is NOT designed to be used as a plow edge on its own. We make a UHMW Plow edge that is sold below for those seeking a UHMW edge to clear their driveway and pavement surfaces.
(7) Carriage bolts, (7) Flat washers, (7) Lock nuts for installing this kit.. Includes installation and use instructions.
Note, the UHMW strap is a rubber edge clamping strap ONLY, it is not intended to be used for clearing snow on the pavement with the strap. It is made purely to hold the rubber edge on the plow properly for those plow owners who don’t have a metal plow edge or those who don’t want to fabricate their own steel edge mounting strap.
If you would like to use a UHMW edge, our UHMW edges for this plow are listed below.
UHMW Custom Made Plow Edge Kit
Deere never made a UHMW plow edge for this plow. We make this edge for those who want to scrape the pavement like they are using a steel edge, but they want the protection against surface abrasion that steel edges can cause to asphalt, concrete and any hard surface. UHMW is the answer. Our edge is machine cut to perfectly fit the plow.
We offer two UHMW Edge kits for this Plow, a single side UHMW wear edge and our Double Sided UHMW Plow edge.
Single Side UHMW Plow Edge Kit includes;
(1) UHMW Plow Edge machined to fit this plow. The UHMW is 2.5” tall and 1/2” thick. All mounting slots are machined to properly hold the carriage bolts to install this edge on the plow.
Double Side UHMW Plow Edge Kit includes;
(1) UHMW Plow Edge machined to fit this plow. The UHMW is 5” tall and 1/2” thick. All mounting slots are machined down the center of this wear edge to provide two wear edges and to properly hold the carriage bolts to install this edge on the plow.
Either UHMW Plow Edge kit ships with;
(7) Carriage bolts, (7) Flat washer and (7) Lock nuts to install this plow edge. Includes installation and use instructions.
Special Note.
If you are going to use your plows original steel plow edge to mount these rubber plow edges, make sure you take these steps to protect your plow edge and get the best results.
Flip the steel edge upside down so the sharp side from grinding on the road, faces the top of the plow and isn’t against the rubber at the base of the plow.
Paint the bare metal on the metal strap to prevent rust and corrosion.
Make sure to mount the strap so the sharp side isn’t towards the bottom of the plow as we don’t want the rubber to flex forward and backward against the sharp edge.
Also make sure the bottom of the steel strap is at least 1” above the bottom of the new rubber edge when installed.
Which Plow Edge is right for you?
The following uses are best suited for these plow edges.
Rubber Plow Squeegee Edge
Pavement which you want to protect from damage
Uneven pavement surfaces that have repairs or surface damage
Clearing grass areas, the rubber edge works great for clearing lawn, grass, and areas where you don’t want to strip the surface.
Gravel and stone drives as the rubber displaces less of the surface material than will the other plow edges.
Surfaces with numerous joints or edges, such as brick pavers, landscape stones, custom or hand laid surfaces, etc.
UHMW Plow Edge
Have questions or need help selecting the best plow edge kit for your use? Contact us, we will gladly discuss your needs and concerns with you. You may call our office or send an email and we will help address your concerns.
Thank you for your interest in our products.
American Made products produced in Michigan by Small Business
These parts fit the 42” Series Model 20 Plow used on the Deere 108, 111, 111H, 112L, 116, 116H, 130, 160, 165, 170, 175, 180 or 185 model garden tractors
These parts also fit the Model 21 Plow used on the Deere LX172, LX173, LX176, LX178, LX188, LX255, LX277, LX288 GT Series and 320.
These parts also fit the Model 22 Plow used on the Deere LT133, LT155, LT166 and LTR155 and LTR166.
Please double check your parts book to make sure your plow meets the descriptions used in this listing.
Image 1 of 10
Image 2 of 10
Image 3 of 10
Image 4 of 10
Image 5 of 10
Image 6 of 10
Image 7 of 10
Image 8 of 10
Image 9 of 10
Image 10 of 10