Free Ground Shipping to Lower 48 States
Replace the steel wear bar and shoes on your Deere 42” front snowblower with our low friction, extremely strong UHMW parts to protect your pavement and your blower housing from surface friction.
This 42” front blower is known as the Model 40 blower and is used on the 240, 245, 260, 265, 285, 320, 335, 345, 355D, GX,LX,GT Tractors and many more. Please note,
This blower features a round back side of the blower housing, as shown in the images for these parts.
This blower fits many lawn tractors made from 1988 to 2005.
The newer 42” blower is also listed on our site.
Need help finding the right parts for your blower? No problem, contact us. We are glad to help you get what you need.
Not sure if this fit your blower? If your blower uses the following wear bar and shoe part numbers, these are the parts you need. Still not sure? Take a photo of your blower and its tag with model and serial number and send it to us for confirmation.
Our UHMW Blower Shoes replace the steel shoes M135188
Buy our UHMW wear bar, our UHMW Blower Shoes or a UHMW Conversion kit, which includes the UHMW wear bar, a pair of UHMW blower shoes, all necessary hardware and it saves you 10% off the individual price.
The UHMW wear bar to replace the steel M142882 wear bar is very likely, the last wear bar you will have to purchase for your 42” Deere Snowblower. Comes complete with a full set of Stainless Steel Hardware to make the installation easy and trouble free.
The UHMW blower shoes replace M135188 and
are sold as a pair, with stainless hardware.
Our blower shoes are double sided, giving you twice the wear life of the steel shoes they replace.
Adjustable and easy to install, our shoes install outside of the blower
Our UHMW wear bar and blower shoes have the following benefits;
No more metal scraping and screeching on the pavement.
No more surface damage to the asphalt or concrete surfaces.
Quiet and very smooth, the blower pushes easier and cleans the pavement great.
No more rust on the floor from the metal wear bar or shoes.
Balances the blower better and keeps the blower square on the pavement.
Even makes the blower easier to move by hand for connecting to the mower or lawn tractor.
Installs with basic hand tools, with most installs taking 30 to 45 minutes for replacing the steel wear bar and installing the pair of new UHMW shoes.
Direct replacement, bolts in place of the steel bar or shoes. Includes all stainless hardware to prevent rust in the future.
Any questions about whether this will fit your 42” front Deere blower, check with us. Make sure your blower uses the Deere wear bar M142881 and the blower shoes M135188 and these parts will fit on your blower.
Free Ground Shipping to Lower 48 States
Replace the steel wear bar and shoes on your Deere 42” front snowblower with our low friction, extremely strong UHMW parts to protect your pavement and your blower housing from surface friction.
This 42” front blower is known as the Model 40 blower and is used on the 240, 245, 260, 265, 285, 320, 335, 345, 355D, GX,LX,GT Tractors and many more. Please note,
This blower features a round back side of the blower housing, as shown in the images for these parts.
This blower fits many lawn tractors made from 1988 to 2005.
The newer 42” blower is also listed on our site.
Need help finding the right parts for your blower? No problem, contact us. We are glad to help you get what you need.
Not sure if this fit your blower? If your blower uses the following wear bar and shoe part numbers, these are the parts you need. Still not sure? Take a photo of your blower and its tag with model and serial number and send it to us for confirmation.
Our UHMW Blower Shoes replace the steel shoes M135188
Buy our UHMW wear bar, our UHMW Blower Shoes or a UHMW Conversion kit, which includes the UHMW wear bar, a pair of UHMW blower shoes, all necessary hardware and it saves you 10% off the individual price.
The UHMW wear bar to replace the steel M142882 wear bar is very likely, the last wear bar you will have to purchase for your 42” Deere Snowblower. Comes complete with a full set of Stainless Steel Hardware to make the installation easy and trouble free.
The UHMW blower shoes replace M135188 and
are sold as a pair, with stainless hardware.
Our blower shoes are double sided, giving you twice the wear life of the steel shoes they replace.
Adjustable and easy to install, our shoes install outside of the blower
Our UHMW wear bar and blower shoes have the following benefits;
No more metal scraping and screeching on the pavement.
No more surface damage to the asphalt or concrete surfaces.
Quiet and very smooth, the blower pushes easier and cleans the pavement great.
No more rust on the floor from the metal wear bar or shoes.
Balances the blower better and keeps the blower square on the pavement.
Even makes the blower easier to move by hand for connecting to the mower or lawn tractor.
Installs with basic hand tools, with most installs taking 30 to 45 minutes for replacing the steel wear bar and installing the pair of new UHMW shoes.
Direct replacement, bolts in place of the steel bar or shoes. Includes all stainless hardware to prevent rust in the future.
Any questions about whether this will fit your 42” front Deere blower, check with us. Make sure your blower uses the Deere wear bar M142881 and the blower shoes M135188 and these parts will fit on your blower.
Image 1 of 11
Image 2 of 11
Image 3 of 11
Image 4 of 11
Image 5 of 11
Image 6 of 11
Image 7 of 11
Image 8 of 11
Image 9 of 11
Image 10 of 11
Image 11 of 11